Alpine IVX-C806 Owner's Manual download pdf (Page 38)

36-EN

→

→

→

→

Audio Processor Operation (Optional)

Adjusting Time-Correction for

2-Way Speaker System

Use this procedure to adjust the sound time

difference between the speakers.

1 Press and hold the FUNC (RETURN) button for

at least 2 seconds in the Divider mode.

The mode changes to the Divider Adjustment

mode.

2 Press the 3 (T-CORR.) button.

The mode changes to the Time Correction

Adjustment mode.

3 Press the rotary encoder and select the channel

you wish to adjust.

Each press changes the channels as follows:

When only one 2-way divider is connected:

→ L-Low → R-Low → F-High/L

R-High/R ← R-High/L ← F-High/R ←

When two 2-way dividers are connected:

→ L-Low → R-Low → L-High → R-High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment and Rear adjustment modes,

and the display also changes.

→ L-Low → R-Low → L-High → R-High

When only one 3-way divider is connected:

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

When two 3-way dividers are connected:

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment and Rear adjustment modes,

and the display also changes.

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

4 Rotate the rotary encoder clockwise or

counterclockwise to adjust the time correction

value upward or downward respectively.

5 When adjustments have been completed, press

the FUNC (RETURN) button.

The display returns to the Divider mode screen.

(IVX-C806)

SOURCE

SOURCE

Rotary encoder Rotary encoder

FUNC

FUNC

6

6

4

4

3

3

Function buttons

(1 through 6)

Function buttons

(1 through 6)

(IVX-M706 .... with MD built-in

CVA-1006R ...

without MD built-in)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

Comments to this Manuals

No comments