Alpine IVX-C806 Owner's Manual download pdf (Page 37)

35-EN

→

→

→

→

6 Press the rotary encoder and select the channel

that you wish to adjust.

Each press changes the channel as follows.

When only one 2-way divider is connected:

→ Low → F-High → R-High

When two 2-way dividers are connected:

→ Low → High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment and Rear adjustment modes,

and the display also changes.

→ Low → High

When only one 3-way divider is connected:

→ Low → Mid-L → Mid-H → High

When two 3-way dividers are connected:

→ Low → Mid-L → Mid-H → High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment and Rear adjustment, and the

display also changes.

→ Low → Mid-L → Mid-H → High

7 Rotate the rotary encoder clockwise or

counterclockwise to adjust the Cross-Over point

upward or downward to your desired point.

8 When the adjustment has been completed, press

the FUNC (RETURN) button. The display returns

to the Divider mode screen.

→

→

Adjusting Levels

1 Press and hold the FUNC (RETURN) button for

at least 2 seconds in the Divider mode.

The mode changes to the Divider Adjustment

mode.

2 Press the 2 (LEVEL) button. The mode changes

to the Level Adjustment mode.

3 Press the rotary encoder and select the channel

you wish to adjust.

Each press changes the channels as follows:

When only one 2-way system divider is

connected:

→ L-Low → R-Low → F-High/L

R-High/R ← R-High/L ← F-High/R ←

When two 2-way system dividers are

connected:

→ L-Low → R-Low → L-High → R-High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment, and Rear adjustment modes,

and the display also changes.

→ L-Low → R-Low → L-High → R-High

When only one 3-way divider is connected:

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

When two 3-way dividers are connected:

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

Each time the 6 (F/R) button is pressed,

the mode switches between the Front

adjustment and Rear adjustment modes,

and the display also changes.

→ L-Low → R-Low → L-Mid → R-Mid → L-High → R-High

4 Rotate the rotary encoder clockwise or

counterclockwise to adjust to your desired level

upward or downward respectively.

5 When adjustments have been completed, press

the FUNC (RETURN) button.

The display returns to the Divider mode.

→

→

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 69 70

Comments to this Manuals

No comments