Alpine INA-N333R Owner's Manual download pdf (Page 9)

7-EN

Radio Operation

Switching the Tuner Mode

The INA-N333R incorporates the MAX TUNE Pro for the

highest quality tuner audio. Moreover, you can choose

between two settings to suit your own personal sound

preferences usage.

1 Press and hold the F/SETUP button for at least 2

seconds. The display changes to the SETUP screen.

2 Move the Flipper switch up or down to select FM

CONDITION. Press the OK button or MODE knob to

set.

3 Move the Flipper switch up or down to select your

preference. Press the OK button or MODE knob to set.

The display returns to the SETUP screen.

HI-FI: Sound quality priority setting

NORMAL: Standard setting

STABLE: Noiseless priority setting

NOTES

• The initial setting at the factory is "NORMAL."

• If you find the sound is very noisy while listening to the tuner

in the HI-FI mode, we recommend you change to the

NORMAL mode.

4 When the setting is completed, press the F/SETUP

button to return to the normal mode.

Listening to Radio

1 Press the SOURCE/POWER button until a radio

frequency appears in the display.

2 Press the BAND/TEL. button repeatedly until the

desired radio band is displayed.

Press the TUNE/A.ME button to select the tuning mode.

DX SEEK (Distance mode) → SEEK (Local mode) →

OFF (Manual mode) → DX SEEK

NOTE

The initial mode is DX SEEK.

Distance mode:

Both strong and weak stations will be automatically

tuned in (Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in

(Automatic Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual

tuning).

4 Press the or button to tune in the desired

station.

Holding down the or button will change the

frequency continuously.

NOTES

• The STEREO indicator appears on the display when a Stereo

FM station is tuned in.

• About TMC Broadcast Indicator

The TMC indicator, which is displayed in the audio mode, is

displayed when a TMC reception station is included in the

selected broadcast station. The TMC information cannot be

obtained.

The TMC indicator, which is displayed in the navigation mode

(when optional NVD-T003 is used), is displayed when the

conditions for obtaining the TMC information have been

satisfied.

The optional navigation disc (NVD-T003) is required in order

to obtain the TMC information.

Please see the instruction manual of the navigation disc for

details.

Manual Storing of Station Presets

1 Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

2 Press and hold the Preset button (1 through 6) that

you want to store the station on for at least 2 seconds.

The selected station is stored.

3 Repeat the procedure to store up to 5 other stations

onto the same band.

To use this procedure for other bands, simply select

the band desired and repeat the procedure.

A total of 30 stations can be stored in the preset

memory (6 stations for each band; FM-1, FM-2, FM-3,

MW and LW).

NOTE

If you store a station in a preset memory which already has a

station, the current station will be cleared and replaced with the

new station.

FM-1 FM-2

LW FM-1

FM-3

F/SETUP Preset buttons (1 through 6)

BAND/TEL.

MODE Flipper switchOK

TUNE/A.ME

SOURCE/

POWER

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 45 46

Comments to this Manuals

No comments

Alpine INA-N333R Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Receiver Alpine INA-N333R