Alpine INA-N333R Owner's Manual download pdf (Page 24)

22-EN

Controlling Changer (Optional)

An optional 6-disc (including MP3 compatible changer)

or 12-disc CD Changer may be connected to the INA-

N333R if it is Ai-NET compatible. With a CD Changer

connected to the Ai-NET input of the INA-N333R, the

CD Changer will be controllable from the INA-N333R.

Using the KCA-400C (the Multi-Changer Switching

device) or KCA-410C (Versatile Link Terminal) multiple

changers can be controlled by the INA-N333R.

See the Multi-Changer Selection section on this page for

selecting the CD Changers.

NOTES

• The controls on the INA-N333R for CD Changer operation are

operative only when a CD Changer is connected.

• The DVD changer (optional) is controllable from the INA-

N333R as well as the CD changer.

1 Press the SOURCE/POWER button to activate the

CHANGER mode. The display shows the disc number

and track number.

NOTE

The source indicator varies depending on the connected source.

2 Press the Disc Select buttons (1 through 6)

corresponding to one of the discs loaded in the CD

Changer. The selected disc number appears in the

display and CD playback starts.

3 To pause playback, press the button.

Pressing the button again will resume playback.

NOTES

• After selecting the desired disc, you can operate in the same

way as for the CD player.

For details, please see the CD Operation section.

• If the "FUNC" indicator is illuminated the Disc Select buttons

become nonfunctional.

• The MP3 indicator is lit during MP3 playback.

• Press BAND to switch the Disc mode in the CD/DVD/

Changer mode.

• When an MP3 compatible CD player is connected, the unit

can play discs containing both audio data and MP3 data.

Changer Operation (optional)

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is

the same as for the 6-disc CD Changer. To select discs

numbered from 7 to 12, first press the F/SETUP button.

This changes the "D" indicator to "d". Then press the

desired Preset button. With the F/SETUP button

activated, the Preset buttons 1 to 6 will represent discs

7 to 12 respectively.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers, the

KCA-400C (Multi-Changer Switching device) must be

used. If you use 1 Switching device, you can connect up

to 4 CD Changers. If you use 2 Switching devices, you

can connect up to 6 CD Changers. When using KCA-

410C (Versatile Link Terminal), you can connect two

changers and two external outputs (AUX).

1 Press the SOURCE/POWER button to activate the CD

Changer mode.

Alternatively, press the SOURCE button on the Remote

Control (optional) to activate the CD Changer mode.

Proceed to Step 3 below to select the desired CD

Changer.

2 Press the BAND button on this unit or the Remote

Control (optional) to activate the CD Changer Selection

mode.

3 The CD Changer Selection mode remains active for 3

seconds after Step 2 is performed. Press the BAND

button on this unit or the Remote Control until the

desired CD Changer indicator appears on the display.

NOTES

• If the selected CD Changer is not connected, the display will

show "NO CHANGER."

• For further details about the external input (AUX) when using

KCA-410C, see "Setting the AUX Mode (V-Link)" on page 20.

SOURCE/

POWER

Disc select buttons

(1 through 6)

5 ( )

F/SETUP

BAND

4 ( )

6 ( )

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Comments to this Manuals

No comments

Alpine INA-N333R Owner's Manual Page 24

Comments to this Manuals

Related products and manuals for Receiver Alpine INA-N333R