Alpine INA-N333R Owner's Manual download pdf (Page 12)

10-EN

Light M Classics Other M

RDS Operation

PI SEEK Setting

1 Press and hold the F/SETUP button for at least 2

seconds. The display changes to the SETUP screen.

2 Move the Flipper switch up or down to select PI

SEEK. Press the OK button or MODE knob to set.

3 Move the Flipper switch up or down to select ON or

OFF. Press the OK button or MODE knob to set. The

display returns to the SETUP screen.

4 Press the F/SETUP button again to return to normal

operation.

Receiving Traffic Information

1 Press the T.INFO/ANNC. button to activate the Traffic

Information mode.

To cancel the Traffic information mode, press the

T.INFO/ANNC. button again.

2 Press the or button to select your desired

traffic information station. When a traffic information

station is tuned in, the TP indicator lights up.

Traffic information is heard only when it is being

broadcast. If traffic information is not being broadcast,

the unit is set in the standby mode. When a traffic

information broadcast begins, the unit automatically

receives it and the display shows "T.INFO".

When traffic information broadcast is over, the unit will

automatically set in the standby mode.

NOTES

• If the traffic information broadcast signal falls below a

certain level, the unit remains in the receiving mode for 70

seconds. If the signal remains below a certain level for over

70 seconds, the "T.INFO" indicator blinks.

• If you do not want to listen to the traffic information being

received, lightly press the T.INFO/ANNC. button to skip that

traffic information message. The T.INFO mode will remain in

the ON position to receive the next traffic information

message.

• If the volume level is changed while receiving traffic

information, the changed volume level will be memorized.

When traffic information is received next time, the volume

level will be automatically adjusted to the level memorized.

•

In the T.INFO mode, the SEEK tuning selects only the TP stations.

PTY (Programme Type) Tuning

1 Press the F/SETUP button. The "FUNC" indicator will

illuminate.

2 Press the 2/PTY button to activate the PTY mode, in

the FM radio mode. The Programme Type of the station

being currently received will be displayed for 5

seconds.

If there is no receivable PTY broadcast, "NO PTY" will

be displayed for 5 seconds.

NOTE

If no buttons are pressed within 5 seconds after pressing the 2/

PTY button, the PTY mode will be automatically cancelled.

3 Press the and buttons or move the Flipper

switch up or down within 5 seconds after activating the

PTY mode to choose the desired programme type

while the PTY (programme type) is being displayed.

Each press scrolls the programme type by one.

4 Press the 2/PTY button within 5 seconds after

selecting the programme type to start searching for a

station in the selected programme type.

If the received station is found, the programme type of

the received station will be displayed for 5 seconds.

If no station is found, "NO PTY" will be displayed for 2

seconds.

5 Press the F/SETUP button to activate the normal

mode. The "FUNC" indicator will turn off.

NOTES

• Operate the unit while the "FUNC" indicator is illuminated.

If no buttons are pressed within 5 seconds, the "FUNC"

indicator will turn off.

• When the Navigation disc (sold separately) is inserted and the

system is set in navigation mode, the selected language can be

used with the PTY (Programme Type) or P.PTY (Priority

Programme Type) language.

F/SETUP

T.INFO/ANNC.

2/PTY 3/P. PTY

MODE Flipper switchOK

TITLE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Comments to this Manuals

No comments

Alpine INA-N333R Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Receiver Alpine INA-N333R