Alpine INA-N333R Owner's Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 46
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
28-EN
Receiving Announcement Information
of DAB Local Stations
1 Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
2 Move the Flipper switch up or down to select DAB
REGIONAL.
Press the OK button or MODE knob to set.
3 Move the Flipper switch up or down to select ON or
OFF.
ON: You can automatically receive the announcement
interrupt of the regional you are currently in.
OFF: Announcement interrupt is valid for all regions.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
4 When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTES
You can also press the
or
button instead of the
Flipper switch to select an item.
You can also press the button instead of the OK button or
MODE knob to set an item.
Setting for Automatic Change from
DAB to RDS
When the DAB reception is poor, you can set this
selection ON to automatically change to the RDS station
(a station that can be received) within the same
broadcasting station until good reception is achieved.
You can switch this for voice only (except Service label/
Dynamic label display). The display and operation
remain as for DAB.
1 Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
2 Move the Flipper switch up or down to select RDS/
DAB SW.
Press the OK button or MODE knob to set.
3 Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
4 When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTE
When reception is being changed from DAB to RDS, the DAB
indicator blinks.
Setting ON/OFF for DRC (Dynamic
Range Control)
If you set this ON when receiving the sound of a wide
Dynamic Range, the DRC (Dynamic Range Control)
gain increases when the source sound is small, and the
DRC (Dynamic Range Control) gain decreases when
the source sound is large, making the Dynamic Range
narrower to give you better and more comfortable sound
even in the vehicle that produces a large noise.
1 Press and hold the F/SETUP button for at least 2
seconds.
The display changes to the SETUP screen.
2 Move the Flipper switch up or down to select DRC.
Press the OK button or MODE knob to set.
3 Move the Flipper switch up or down to select ON or
OFF.
Press the OK button or MODE knob to set. The display
returns to the SETUP screen.
4 When the setting is completed, press the F/SETUP
button to return to the normal mode.
NOTE
When a radio programme is set to ON, sound other than what
you previously set may be produced depending on the broadcast.
In this case, turn the programme OFF.
DAB Operation (optional)
MODEOK
F/SETUP
Flipper switch
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Comments to this Manuals

No comments