Alpine CVA-1003R Owner's Manual download pdf (Page 9)

7-EN

Basic Operation

Turning Power On and Off

Some of this unit's functions, cannot be performed

while the vehicle is in motion. Be sure to stop your

vehicle in a safe location and apply the parking

brake, before attempting these operations.

1 Press the PWR (Power) button to turn on the

unit.

The opening screen appears automatically on

the monitor display.

NOTE

The unit can be turned on by pressing any other buttons

except the OPEN/CLOSE and ANGLE 7 8 buttons.

The volume level gradually increases to the previous

level you were listening to before the unit was turned

off. Press and hold the PWR (Power) button for at

least 2 seconds to turn off the unit.

NOTES

• After turning the system off, a slight ghost of the image

will remain temporarily. This is an effect peculiar to

LCD technology and is normal.

• Under cold temperature conditions, the screen may

lose contrast temporarily. After a short warm-up

period, it will return to normal.

• The CVA-1003R draws minimal current even when its

power switch is turned off. If the switched power

(ignition) lead of the CVA-1003R is connected directly

to the positive (+) post of the vehicle's battery, the

battery may be discharged. If this lead is unswitched,

it must be disconnected from the battery post should

the vehicle be left unused for an extended period of

time.

An SPST (Single-Pole, Single-Throw) switch (sold

separately) can be added to simplify this procedure.

Then, you can simply place it in the OFF position

when you leave the vehicle. Turn the SPST switch back

ON before using the CVA-1003R. For connecting the

SPST switch, refer to "Connection Diagram of SPST

Switch" on page 49.

• Some operation of the unit cannot be performed while

the vehicle is in motion. In this case, be sure to first

stop your vehicle and apply the parking brake, then

perform the operation.

Raising the Monitor

1 Press the OPEN/CLOSE button.

The unit beeps 3 times and raises the monitor

automatically.

NOTES

• The CVA-1003R is a precision device. With gentle

handling, its unique capabilities can be enjoyed for a

long time.

• If the monitor touches an obstacle while it is being

raised, the unit will stop raising the monitor

immediately. Should this occur, remove the obstacle

and press the OPEN/CLOSE button again to raise the

monitor.

• When the movable monitor is opened, do not place any

object on the monitor and be careful not to bump or

apply any pressure to the monitor while it is open. This

can cause damage to the mechanism.

• Under low ambient temperature conditions, the

display may be dark for a short period of time

immediately after the power is turned on. Once the

LCD has warmed up, the display will return to

normal.

• For your safety, some operation of the unit cannot be

performed while the vehicle is in motion. In this case,

first stop the vehicle and engage the parking brake,

then perform the operation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 57 58

Comments to this Manuals

No comments

Alpine CVA-1003R Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for CD players Alpine CVA-1003R