Alpine CVA-1003R Owner's Manual download pdf (Page 39)

37-EN

Other Useful Features

Displaying Time

1 When the monitor display is closed, press the

CLOCK button repeatedly until the clock time is

displayed in the sub display.

NOTES

• Selecting any tuner or CD function while in the clock

priority mode will interrupt the time display

momentarily. The function selected will be displayed

for about 5 seconds before the time returns to the

display.

• The clock time is not shown on both the monitor

display and the sub display simultaneously.

Setting Time

1 When the monitor display is open, press and

hold the SETUP button for at least 2 seconds.

The SETUP screen appears.

2 Press the Preset 2 button to activate GENERAL

setting mode. Press the Preset 2 button again to

select CLOCK ADJ., then press the TUNE button

or g DN/f UP buttons to appear the clock

adjusting menu.

3 Press the Preset 2 button to select HOUR. Then

press the g DN or f UP button to adjust

the hour.

4 Press the Preset 2 button to select MINUTE.

Then press the g DN or f UP button to

adjust the minutes.

To quickly set the time to the nearest hour, press

the Preset 2 button to select MINUTE ZERO,

then press the TUNE button or

g DN / f UP

buttons.

If the minute is ":30" or under, the hour is the

current number. If the minute is more than ":30",

or if you set the minute to "00", the hour is

moved up.

To return to the

previous mode, press the Preset 2

button to select RETURN, then press the TUNE

button, or the g DN or f UP button.

5 After setting is completed, press the SETUP

button to return to normal mode.

Selecting Rear Monitor

When using the optional expansion BOX (KCE-

103V), If AUX, NAV. is to ON in "Setting the

External Input" (page 38), and if a rear-seat

monitor and navigation system are connected to

the CVA-1003R, you can switch the picture/sound

of the rear-seat monitor from the CVA-1003R.

1 When the monitor display is open, press and

hold the SETUP button for at least 2 seconds.

The SETUP screen appears.

2 Press the Preset 3 button to activate the

AUXILIARY setting mode. Press the Preset 3

button again to select AUX OUT.

3 Press the g DN or f UP button to activate

the AUX OUT setting mode.

AUX-1 IN : The picture/sound of the device

connected to Terminal AUX 1 will be

played on the rear-seat monitor.

AUX-2 IN : The picture/sound of the device

connected to Terminal AUX 2 will be

played on the rear-seat monitor.

NAV. IN : The navigation screen will be

displayed and the voice guidance will

be produced on the rear-seat monitor

if the navigation system is

connected.

OFF : mode cancels AUX OUT.

To set another setting, press the Preset 3 button

or another Preset button.

4 After setting is completed, press the SETUP

button to return to normal mode.

NOTE

If a DVD player or DVD changer is connected to the

AUX 1 or AUX 2 terminal, the DVD picture appears by

performing steps 1 and 2 of "Simultaneous Operation"

on page 42. Then, perform steps 1 to 4 on this page so

the DVD picture and sound are output.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Comments to this Manuals

No comments

Alpine CVA-1003R Owner's Manual Page 39

Comments to this Manuals

Related products and manuals for CD players Alpine CVA-1003R