Alpine CVA-1003R Owner's Manual download pdf (Page 24)

22-EN

CD Player/Changer Operation (Optional)

3 The CD Changer Selection mode remains active

for 3 seconds after step 2 is performed. Press

the BAND button until the desired CD Changer

indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display

will show "NO CHANGER."

Alternatively press the BAND button on the

Remote Control until the desired changer

indicator appears on the display.

4 To operate the selected changer, see "CD Player

Operation" section.

NOTE

If an optional CD/MD/DVD player is connected to the

unit, the disc mode can be switched each time you press

the BAND button (see "Switching Disc Mode" on page

41).

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers,

the KCA-400C (Multi-Changer Switching device)

must be used. If you use 1 Switching device, you

can connect up to 4 CD Changers. If you use 2

Switching devices, you can connect up to 6 CD

Changers.

1 Press the SOURCE button on the CVA-1003R to

activate the CD Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (optional) to activate the CD

Changer mode. Proceed to step 3 below to

select the desired CD Changer.

2 Press the BAND button on the CVA-1003R or

the Remote Control to activate the CD Changer

Selection mode.

SOURCE

BAND

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

No comments

Alpine CVA-1003R Owner's Manual Page 24