Alpine PXA-H701 User Manual

ENFRESR ALPINE ELECTRONICS MARKETING, INC.1-1-8 Nishi Gotanda,Shinagawa-ku, Tokyo 141-0031, JapanPhone 03-5496-8231ALPINE ELECTRONICS OF AMERICA, INC.

8-ENPerforming time correction manually(TCR)/Switching the phaseBecause of the particular conditions inside thevehicle, there are major differences in

9-ENENFRESDESEIT9 Turn the Rotary encoder to switch the phase,then press the CHANNEL button.Press the ENTER button to return to step 8.0 18010Repeat s

10-ENSettings/AdjustmentsBass FocusThe time difference between the front-rear/left-right speakers, can be adjusted a pair at a time.Audible time corre

11-ENENFRESDESEITExample of Steps 4 and 5 Setting1.After entering corrections for the front (left andright) speakers in STEP 30, the time differenceis

12-ENSettings/Adjustments (factory default)*3 When center is set to subwoofer, it becomesSub.W(R).5 Turn the Rotary encoder to select thefrequency, t

13-ENENFRESDESEITParametric equalizer adjustmentsThe frequency bands of the graphic equalizer arefixed. This makes it very difficult to correct forund

14-ENNOTES• When the speaker is set to the “OFF” mode, theparametric equalizer for that speaker is ineffective.Refer to “Setting the speakers” (page 4

15-ENENFRESDESEITX-OVERThe PXA-H701 is equipped with an activecrossover allowing the frequency bands to besplit before amplification. Because of this,

16-EN*1 When center is set to subwoofer, it is notdisplayed.*2 When center is set to subwoofer, it becomesSub.W(L).*3 When center is set to subwoofer,

17-ENENFRESDESEITHint for adjusting the subwoofer• If the subwoofer is installed on the rear deck,setting a gentle L.P.F. slope (for example 6 dB/oct.

18-ENMX settingsMX (Media Xpander) makes vocals orinstruments sound distinct regardless of themusic source. The radio, CD, and MP3, will beable to rep

19-ENENFRESDESEIT3 Turn the Rotary encoder to select the source(media) you want to set, then press the ENTERbutton.4 Turn the Rotary encoder to select

20-EN* If DOLBY PL II MUSIC is selected, thecenter width can be adjusted with followingoperations.This function offers the optimum vocal positionby ad

21-ENFRESDESEITAdjustment procedure for Dolby SurroundMake the adjustments described below in order to reproduce Dolby Digital and DTS sound with grea

22-ENUsing Dolby SurroundOFF:When no speaker is connectedSMALL:When a speaker that cannot play lowfrequencies (80 Hz or less) is connectedLARGE:When a

23-ENFRESDESEIT4 Turn the Rotary encoder to select “Auto”, thenpress the ENTER button. Test tone output isrepeated for each of the different speakerch

24-ENUsing Dolby SurroundAdjusting the acoustic imageIn most installations, the center speaker must beplaced directly between the front passenger andd

25-ENFRESDESEITAchieving powerful high volume soundWith Dolby Digital, the dynamic range iscompressed so that powerful sound can beachieved at regular

26-ENConvenient FunctionsLinear PCM settingThe output when playing discs recorded in linearPCM can be set to 2 or 3 channels.1 Press the SETUP button.

27-ENENFRESDESEITDisplay settingsThe display’s contrast and LCD (negative/positive) can be adjusted.1 Press the SETUP button.The setup mode is set.2 T

1-ENFRESDESEITContentsOperating InstructionsWARNINGWARNING ... 2CAUTION ...

28-ENConvenient FunctionsStoring settings in the memoryThis function can store up to 6 adjustments/settings.The following adjustments/settings are sto

29-ENENFRESDESEITSwitching the display mode1 Press the DISP button to select the desireddisplay mode.INP HTCP– 2UL RLs RsFLECPSExample of input channe

30-ENInstallation and ConnectionsBefore installing or connecting the unit, pleaseread the following and pages 2 and 3 of thismanual thoroughly for pro

31-ENFRESDESEITARRANGE THE WIRING SO IT IS NOT CRIMPED ORPINCHED BY A SHARP METAL EDGE.Route the cables and wiring away from moving parts (likethe sea

32-ENInstallation and ConnectionsIMPORTANTPlease record the serial number of your unit inthe space provided below and keep it as apermanent record. Th

33-ENFRESDESEITInstallationMounting the control unit (Sold Separately)CAUTION:Do not install the control unit near the air-bag of thefront passenger’s

34-ENInstallation and Connections3 Mount the spacer and bracket to the control unit.Next, securely mount the factory bracketsremoved from the factory

35-ENFRESDESEITMounting the base unit● Velcro Fastener MountingAttach to the vehicle (such as under thedashboard).Flanged self-tapping screw (M4 x 14)

36-ENInstallation and ConnectionsBasic Connections Diagram Display (Sold Separately)Cord colors and cord/terminal specificationsConnect to:• Front 1 s

37-ENFRESDESEITExamples of system expansionBatteryBlue/WhiteBlue/WhiteWhite/greenNot used in this systemNot used in this systemTo External Amplifier R

2-EN WARNINGWARNINGThis symbol means important instructions.Failure to heed them can result in serious injuryor death.DO NOT OPERATE ANY FUNCTION T

38-ENInstallation and ConnectionsNOTEPlease observe the following when using Fiber Optic Cable.• Do not coil the Fiber Optic Cable smaller than a 30mm

39-ENFRESDESEIT• PXA-H701 + Head Unit + Video Deck etc. + External Amplifier• For connecting a head unit with which Ai-NET connections are not possibl

40-ENInstallation and Connections• PXA-H701 + IVA-D300 Head Unit + CD Changer + NavigationSystem + External AmplifierNOTEAlso refer to the operating i

41-ENENFRESDESEITInformationTerminologyDolby DigitalDolby Digital is a digital audio compressiontechnology developed by Dolby Laboratories thatallows

42-ENIn case of difficultyIf you encounter a problem, please review the itemsin the following checklist. This guide will help youisolate the problem i

43-ENENFRESDESEITSpecificationsGraphic EQ number of bands:Front (left and right) 31 bandsRear (left and right) 31 bandsCenter 31 bandsSubwoofer 10 ban

Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. etALPINE ELECTRONIQUE DU CANADA INC.

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to qualitycraftsmanship and are pleased to offer thi

3-ENFRESDESEITPRECAUTIONSTemperatureBe sure the temperature inside the vehicle is between+60°C (+140°F) and –10°C (+14°F) before turning yourunit on.I

4-ENAbout indicators• PRO LOGIC II indicatorLights amber in the Dolby Surround decodemode• Dolby Digital indicatorLights amber in the Dolby Digital de

5-ENENFRESDESEITAdjusting the input levelUsing the analog, RCA-type connections, thePXA-H701’s input level must be preset from thehead unit.Adjust the

6-EN3 Connect the microphone.1) Fasten the microphone included with controlunit at the center of the driver’s seat’sheadrest facing upwards.2) Connect

7-ENENFRESDESEITWith the automatic adjustment function, theoperation described below is performed.Adjustments are completed in about 10 seconds.Time c