Alpine CDE-9848RB Owner's Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
7-EN
RDS
CDE-9848RB
CDE-9846R/CDE-9846RM
Setting RDS Reception Mode and Receiving
RDS Stations
The RDS (Radio Data System) is a radio information system using
the 57 kHz subcarrier of regular FM broadcast. The RDS allows you
to receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press FUNC./SETUP so that the “F” indicator
lights up.
2
Press 19/AF to activate the RDS mode.
3 Press
g
or
f
to tune in the desired RDS
station.
4
Press 19/AF again to deactivate the RDS mode.
5
Press FUNC./SETUP to activate the normal mode.
The “F” indicator goes out.
The RDS digital data includes the following:
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
Recalling Preset RDS Stations
1
Press FUNC./SETUP so that the “F” indicator
lights up.
2
Press 19/AF to activate the RDS mode.
3
Press FUNC./SETUP to activate the normal mode.
The “F” indicator goes out.
4
Make sure that the “F” indicator light goes out, then
press the preset button in which your desired RDS
station is preset.
If the preset station’s signal is weak, the unit automatically
searches and tunes to a stronger station in the AF
(Alternative Frequencies) list.
5
If the preset station and the stations in the AF list
cannot be received:
When the PI SEEK setting is on (refer to “PI SEEK Setting”
on page 8), the unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the area, the unit
displays the frequency of the preset station and the preset
no. disappears.
If the signal level of the Regional (Local) station being
tuned becomes too weak to receive, press the same
preset button to tune in a Regional station in other district.
•For presetting the RDS stations, refer to the Radio Operation
section. The RDS stations can be preset in the F1, F2 and F3 bands
only.
Receiving RDS Regional (Local) Stations
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the setting mode.
2
Press g or f to select “REG”.
3
Press BAND to toggle the mode between
“ON” and “OFF.
In the REG OFF mode, the unit automatically keeps
receiving the related local RDS station.
4
Press FUNC./SETUP to deactivate the setting
mode.
Operate the unit while the “F” indicator lights up. If no operation
is performed within 10 seconds, the “F” indicator goes out.
g f
3
/PTY
BAND
FUNC./SETUP 19/AF TITLE82/NEWS
TA
g
f
3
/PTY
BAND
FUNC./SETUP
19/AF
TITLE82/NEWS
TA
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Comments to this Manuals

No comments