Alpine CDE-9848RB Owner's Manual download pdf (Page 7)

6-EN

Radio

CDE-9848RB

CDE-9846R/CDE-9846RM

Manual Storing of Station Presets

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

Press and hold, for at least 2 seconds, any one of

the preset buttons (1 through 6) that you want

to store the station on.

The selected station is stored.

The display shows the band, preset number and station

frequency memorized.

•A total of 30 stations can be stored in the preset memory (6 stations

for each band: FM1, FM2, FM3, MW and LW).

• If you store a station in a preset memory which already has a

station, the current station will be cleared and replaced with the

new station.

• If the “F” indicator is illuminated, turn off the indicator by

pressing FUNC./SETUP, then you can perform the operation.

Automatic Memory of Station Presets

Press BAND repeatedly until the desired radio

band is displayed.

Press and hold TUNE/A.ME for at least 2 seconds.

The frequency on the display continues to change while

the automatic memory is in progress. The tuner will

automatically seek and store 6 strong stations in the

selected band. They will be stored into buttons 1 to 6 in

order of signal strength.

When the automatic memory has been completed, the

tuner goes to the station stored in preset location No.1.

• If no stations are stored, the tuner will return to the original station

you were listening to before the auto memory procedure began.

Tuning to Preset Stations

Press BAND repeatedly until the desired band is

displayed.

Press any one of the station preset buttons (1

through 6) that has your desired radio station in

memory.

The display shows the band, preset number and

frequency of the station selected.

• If the “F” indicator is illuminated, turn off the indicator by

pressing FUNC./SETUP, then you can perform the operation.

SOURCE/POWER

Listening to Radio

Press SOURCE/POWER until a radio frequency

appears in the display.

Press BAND repeatedly until the desired radio

band is displayed.

F1 (FM1) → F2 (FM2) → F3 (FM3) → MW → LW → F1 (FM1)

Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) → SEEK (Local mode) →

OFF (Manual mode) → DX SEEK

• The initial mode is Distance mode.

Distance mode:

Both strong and weak stations will be automatically tuned in

(Automatic Seek Tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic

Seek Tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

Press g or f to tune in the desired station.

Holding down g or f will change the frequency

continuously.

• The ST indicator appears on the display when a stereo FM station

is tuned in.

BAND

g f

TUNE/A.ME

Preset buttons

(1 through 6)

FUNC./SETUP

TUNE/A.ME

BAND

g f

FUNC./SETUP

Preset buttons

(1 through 6)

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Comments to this Manuals

No comments

Alpine CDE-9848RB Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-9848RB