Alpine IVE-W530 Owner's Manual download pdf (Page 20)

20-EN

Press SOURCE/ .

The SOURCE selection screen is displayed.

Touch [Disc]*.

The display shows the DISC mode screen.

Insert a disc with the label side facing up. The unit starts to

play the disc.

When an optical Alpine DVD player is connected, insert a

disc into the DVD/CD player, and the player starts playing.

* When you want to play a DivX file from a USB device, touch [USB].

• The operation screen changes to the visual screen in the DVD mode

for 5 seconds after an operation has been performed. Touch the

display panel to display the operation screen again.

• The display mode can be changed by touching [WIDE].

For operation, see “Switching Display Modes” on page 28.

To eject the disc

Press .

• The reverse side of a double-sided DVD will not be played

automatically.

Remove the disc, turn it over, and reinsert it.

• If the disc does not eject, press and hold for at least 3 seconds.

• Do not insert discs containing maps for the navigation system. Doing

so could result in damage.

• Be sure that the remote input lead is connected to the remote output

lead of this unit when a DVD player is connected. If not correctly

connected, touching operation cannot be performed.

• Refer also to “DVD Setup” (pages 29 to 30).

• If the disc is left in the unit after pressing , the disc is

automatically pulled back into the unit and stopped. In this case,

start playback by touching [ / ] or eject again and remove the

disc within 15 seconds.

• While “Index reading” is displayed by DivX®, the fast-forwarding/

fast-reversing and repeat functions, etc. cannot be used.

On DVDs, menu screens may appear automatically. If this happens,

perform the operation described below to start playback.

Direct Menu Operations

1 Touch the DVD menu directly.

Menu Operations

1 Touch screen to display the operation keys.

2 Touch [Key].

The menu operation mode will be displayed.

3 Select a desired menu item by touching [ ], [ ], [ ] or [ ].

4 Touch [Enter] to confirm the selected item.

Numeric Keypad Input Operations

1 Touch screen to display the operation keys.

2 Touch [Key].

The menu operation mode appears.

3 Touch [Key] again.

The numeric keypad input mode screen appears.

4 Touch a desired number.

5 Touch [Enter] on the numeric keypad mode screen to confirm

your selection.

If a menu screen appears

• Some operations cannot be performed depending on the disc.

Touch [] to return to the previous display.

(Operation may not be possible, depending on the disc.)

The numeric keypad input screen closes when

the area is touched while being displayed.

Touch [] to close the

numeric keypad input screen.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Comments to this Manuals

No comments

Alpine IVE-W530 Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Car video systems Alpine IVE-W530