Alpine IVE-W530 Owner's Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
34-EN
Setting item: Tint
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
Tint adjustment can be made only in the iPod video, DVD, USB
Video, AUX modes.
When the picture from the external input is set to PAL, you cannot
adjust the Tint.
Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
Setting item: Contrast
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
Setting item: Sharp
Setting content: -5 to +5
Picture quality adjustment range is -5 to +5. “SOFT” and “HARD”
appear as the minimum and maximum values specified.
Picture quality adjustment can be made only in the iPod video, DVD,
USB Video, AUX modes.
Picture quality adjustment cannot be made if a Navigation system
with the RGB feature is connected.
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, Picture Quality and Contrast.
Setting item: User Memory
Setting contents: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Color,
Sharpness, and Contrast” (pages 33-34), touch [ ] or
[ ] of User Memory and then select preset number “P-1”
or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [L-Memory].
The adjusted Visual EQ mode is stored by the above
operations.
You can recall the Visual EQ mode stored here from P-1 or P-2 of
“Selecting the Visual EQ Mode (Factory’s setting)” (page 33).
General Setup Operation
1
Touch [ ] on the main screen.
The SETUP selection screen is displayed.
2
Touch the title bar of General Setup.
The General Setup screen appears.
3
Touch [ ], [ ] or the title bar of setting item, etc., of
the desired item to change its setting.
Setting items:
Clock / Clock Mode*
1
/ Clock Adjust*
1
/ Summer Time*
1
/
Demonstration / Beep / Beep Level*
2
/ Auto Scroll /
Language Sel. / Dimmer Level*
3
*
1
Displayed only when “Clock” is set to “ON”.
*
2
When Beep is ON, the item is displayed.
*
3
Not displayed when “OFF” is set in “Setting the Brightness of the
Backlighting” (page 32).
4
Touch [ ] to return to the previous screen.
Touching [Exit] will turn off the General Setup screen, and return to
previous main screen.
Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting contents: OFF / ON
Adjusting Tint of Picture
Adjusting Image Contrast
Adjusting Picture Quality
Storing Visual EQ
General Setup
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car’s ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3) of “To display the General mode screen”.
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen”.
The following steps 1 to 4 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
Displaying the Time
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Comments to this Manuals

No comments