Alpine INE-W940 User Manual download pdf (Page 60)

60-EN

When an optional camera is connected, the view video of camera can be

output to the monitor.

Depending on your camera, please choose the camera type first. For

details, refer to “Camera Setup” (page 48).

Rear camera:

If an HCE-C305R*/HCE-C300R*/HCE-C210RD/HCE-C200R/

HCE-C117D/HCE-C107D/HCE-C115/HCE-C105 camera is

connected, when the vehicle is reversed, the rear camera view

(guide marks for vehicle width and available distance) is

displayed automatically on the screen of this unit.

* When connecting to HCE-C305R/HCE-C300R, calibration must be

performed. For details, refer to “Calibration” in the owner’s manual

of HCE-C305R/HCE-C300R.

Rear Camera Operation

Set “Rear” for “AUX Camera Setting” (page 48).

Shift the gear lever to the reverse (R) position.

The rear view image is displayed while the car remains in

reverse.

If you shift the gear lever to a position other than

reverse (R), the monitor returns to the previous

screen.

• Never depend solely on the camera when backing up. Always turn

and look and only use the camera for additional assistance.

• This function is effective when the reverse wire is properly connected.

Touch the screen when the image from the camera is

displayed.

The operation screen is displayed on the screen.

• After a 5-second time-out, the operation screen returns to the

camera display screen.

Touch [Guide OFF] on the Rear camera display

screen.

The guide disappears, and then the [Guide OFF] switch

changes to [Guide ON].

Touch [Guide ON] to turn on the guide.

Touch the screen when the image from the camera is

displayed.

The operation screen is displayed on the screen.

• After a 5-second time-out, the operation screen returns to the

camera display screen.

Touch [Caution ].

• For each touch, the caution location moves to the top or bottom of the

screen.

About the Rear Camera Guide

To display the guide, set “Guide Display ON/OFF Setting” (page 60) to

On. You can also turn off the guide in the Rear camera display screen.

Indication mark meaning

When the car is put into reverse gear, the monitor switches to the rear

view camera image. Guides appear to help visualize the car's width and

distance from the rear bumper.

1 Car width extension marks (red, yellow and green in

order of distance)

If properly calibrated, the marks indicate the car's width.

This helps guide the car’s path when backing up in a

straight line.

The marks represent the distance from the rear of the car

(from the rear end of the bumper).

• The marks do not move in synchronization with the

steering wheel.

2 Distance guidance marks

The marks represent the distance from the rear of the car

(from the rear end of the bumper).

• The marks do not move in synchronization with the

steering wheel.

• Each center position of the mark represents about 0.5 m

(red), about 1 m (yellow) and about 2 m (green) behind.

• Depending on the condition of the car or road surface, the range of

vision may vary.

• The camera has a limited range of vision. Objects at extreme angles

to the camera (e.g. under the bumper or at opposite ends of the

bumper) may not be in the its field-of-vision.

• The rear camera image may have a tint which is different from the

actual surroundings.

• Depending on the car, the guidance may deviate to the right or left.

This is not a malfunction.

Camera Operation

(Optional)

You can adjust the quality of the camera image.

Setting items: Bright / Color / Contrast

Refer to “Visual Setting” (page 32).

Displaying the Rear View Video while the

Car is in Reverse

Guide Display ON/OFF Setting

Adjusting the Caution Display Location

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 96 97

Comments to this Manuals

No comments

Alpine INE-W940 User Manual Page 60

Comments to this Manuals

Related products and manuals for Car video systems Alpine INE-W940