Alpine CDE-7860R Owner's Manual download pdf (Page 16)

14-EN

Scanning Programmes

1 Press the SCAN button to activate the Scan

mode.

The first 10 seconds of each track will be played

back in succession.

To stop scanning, press the SCAN button to

deactivate the Scan mode.

NOTE

In case a 6-disc CD changer is connected (CDM-

7874R/CDM-7872R/CDM-7871R only):

Press the F button so that the "FUNC" indicator lights

up, then go to step 1.

Press the F button to return to the normal mode.

The "FUNC" indicator light goes out.

Controlling CD Changer (Optional)

(CDM-7874R/CDM-7872R/CDM-

7871R only)

If an optional Alpine 6-disc CD Changer is

connected to the 8-pin DIN connector (M-Bus) of

the CDM-7874R/CDM-7872R/CDM-7871R, you

can control the CD Changer using the CDM-

7874R/CDM-7872R/CDM-7871R.

NOTE

The CD controls on the CDM-7874R/CDM-7872R/

CDM-7871R for the CD Changer operation are

functional only when the CD Changer is interconnected

with the CDM-7874R/CDM-7872R/CDM-7871R.

1 Press the SOURCE button to activate the CD

Changer.

The display shows "changer", the disc number

and track number.

NOTE

To start play or pause play, press the :/J button.

2 Make sure that the "FUNC" indicator light goes

out, then press the Preset buttons to select the

desired disc loaded in the CD Changer.

NOTES

• After selecting the desired disc, you can operate in

the same way as for the CD player.

For details, please see the CD Operation section.

• If the "FUNC" indicator is illuminated the Disc

Select buttons become nonfunctional.

CD Player Operation

- / J

SOURCE

Preset

SCAN

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments

Alpine CDE-7860R Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-7860R