Alpine NVE-N055PS Owner's Manual download pdf (Page 40)

39-EN

01GB05VPAB222R.fm

ALPINE VPA-B222R 68-02065Z87-A (EN)

Calling up the Preset Memory

Check that Defeat mode is off (page 12).

Press and hold TA/RTN/SETUP for at least 2

seconds.

The SETUP screen is displayed.

Press the joystick up or down to select AP SETUP,

then press the joystick right.

The AP SETUP screen is displayed.

Press the joystick up or down to select PRESET

CALL, then press the joystick right.

Press the joystick up or down to select any one of

the preset numbers (1 through 6), then press //

ENTER.

• It takes a few moments to call up the preset memory.

Using the Pro Logic II Mode

Pro Logic processing can be conducted on the music signals recorded

on two channels to achieve Dolby Pro Logic II surround sound. For

two-channel Dolby Digital and DTS signals, there is also a “REAR

FILL” function for outputting the signals of the front channel to the rear

channel.

Check that Defeat mode is off (page 12).

Press and hold TA/RTN/SETUP for at least 2

seconds.

The SETUP screen is displayed.

Press the joystick up or down to select AP SETUP,

then press the joystick right.

The AP SETUP screen is displayed.

Press the joystick up or down to select D PLII/

REAR, then press the joystick right.

Press the joystick left or right to select the desired

mode of D PLII/REAR.

If MUSIC is selected, the centre width can be adjusted with the

following operations.

This function offers the optimum vocal position by adjusting the

centre channel position between the centre speaker and the L/R

speaker (The adjustments established in “Adjusting the acoustic

image” (page 37) are ineffective while this function is activated).

1 Press the joystick down to select CENTER WIDTH, then

press the joystick left or right to select ON.

2 Press the joystick left or right to adjust the level.

The level can be adjusted between 0 to 7. When the level

increases, the centre channel position moves from the

centre speaker position to both sides.

The centre width control is cancelled when set to OFF.

• This adjustment is effective when the setting of the centre speaker is

SMALL or LARGE in the speaker setup settings.

• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding

or switching the audio channel of this unit while making this

adjustment. The setting is canceled if the Decode mode is switched.

• This adjustment is ineffective when the speaker is set to CENTER

OFF in “Setting the Speakers” (page 32).

• This function only works with two-channel signals. This operation is

ineffective when 5.1-channel DTS or Dolby Digital signals are input.

• If the setting of REAR FILL is made when REAR MIX is ON, sound is

unchanged in the rear fill setting because REAR MIX is given priority

during 2 channel decoder other than linear PCM.

• For linear PCM signals, the voice is output from the rear speaker

regardless of the REAR FILL and REAR MIX setting.

• Pressing TA/RTN/SETUP will return to the previous screen.

Linear PCM Setting

The output when playing discs recorded in linear PCM can be set to 2 or

3 channels.

Check that Defeat mode is off (page 12).

Press and hold TA/RTN/SETUP for at least 2

seconds.

The SETUP screen is displayed.

Press the joystick up or down to select AP SETUP,

then press the joystick right.

The AP SETUP screen is displayed.

Press the joystick up or down to select PCM

MODE.

Press the joystick left or right to select 2CH or

3CH.

• This adjustment is ineffective when the speaker is set to CENTER

OFF in “Setting the Speakers” (page 32).

MOVIE: Suits the stereo TV shows and all programs encoded in

Dolby Surround. It improves the sound field directivity to

near that of discrete 5.1-channel sound.

MUSIC: Can be used for all stereo music recordings, and

provides a wide, deep sound field.

R.FILL: Depending on the input signals, the sound may only be

output from the front speakers. In this case, the “REAR

FILL” function can be used to output signals from the

rear speakers as well.

OFF: Turns D PLII/REAR FILL function to OFF.

2CH: 2ch output (L/R)

3CH: 3ch output (L/R/CENTER)

01GB00VPAB222R.book Page 39 Monday, January 23, 2006 4:24 AM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 76 77

Comments to this Manuals

No comments

Alpine NVE-N055PS Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for Navigators Alpine NVE-N055PS