Alpine NVE-N055PS Owner's Manual download pdf (Page 10)

9-EN

01GB05VPAB222R.fm

ALPINE VPA-B222R 68-02065Z87-A (EN)

Turning AF (Alternative Frequencies) On

or Off

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcasting. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press and hold TA/RTN/SETUP for at least 2

seconds.

The SETUP screen is displayed.

Press the joystick up or down to select RDS, then

press the joystick right.

The display changes to the RDS setting screen.

Press and hold /MENU/FUNC. for at least 2

seconds.

The FUNCTION screen is displayed.

Press the joystick up or down to select the AF

(Alternative Frequency), then press / /ENTER.

• When the AF mode is selected, the unit automatically tunes to a

strong signal station in the AF list.

• Select AF again, then press / /ENTER to select OFF mode

when automatic re-tuning is not required.

Press TA/RTN/SETUP to return to the previous

screen.

Tips

• When the unit receives the PTY31 (Emergency Broadcast) signal, the

unit will show “ALARM” in the display

• The RDS digital data includes the following:

• Refer to GENERAL Setup section (Pages 13-15) about “RDS Time

Display”, “PI SEEK Setting”, “Receiving RDS Regional (Local)

Stations” and “Switching the Display Language of PTY (Programme

Type)”.

Receiving Traffic Information

Press TA/RTN/SETUP to turn on the Traffic Information

mode.

When the traffic information station is tuned in, the TA indicator

lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode.

When a traffic information broadcast begins, the unit

automatically receives it and the display shows “T. INFO”.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

• If the traffic information broadcast signal falls below a certain level,

the unit remains in the receiving mode for 1 minute. If the signal

remains below a certain level for over 70 seconds,

“TA” blink light up in the display.

• If you do not want to listen to the traffic information being received,

lightly press TA/RTN/SETUP to skip that traffic information

message. The T. INFO mode will remain in the ON position to receive

the next traffic information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

PTY (Programme Type) Tuning

Press and hold TA/RTN/SETUP for at least 2

seconds.

The SETUP screen is displayed.

Press the joystick up or down to select RDS, then

press the joystick right.

The display changes to the RDS setting screen.

Changing PTY by the commander

Press and hold or for at least 2 seconds.

PTY is changed.

Changing by the FUNCTION screen

Press and hold /MENU/FUNC. for at least 2

seconds.

The FUNCTION screen is displayed.

Press the joystick up or down to select the PTY

and press the joystick right.

Press the joystick up or down to choose the

desired programme type.

Press / /ENTER after selecting the programme

type to start searching for a station of the selected

programme type.

If no station is found, “NO PTY” will be displayed.

RDS Operation

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

PTY Programme Type

EON Enhanced Other Networks

Joystick

01GB00VPAB222R.book Page 9 Monday, January 23, 2006 4:24 AM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 76 77

Comments to this Manuals

No comments

Alpine NVE-N055PS Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Navigators Alpine NVE-N055PS