Alpine NVE-N055PS Owner's Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 77
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
35-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and centre
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
Check that the Defeat mode is off (page 12).
2
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
3
Press the joystick up or down to select AP SETUP,
then press the joystick right.
The AP SETUP screen is displayed.
4
Press the joystick up or down to select G-EQ.
5
Press the joystick left or right to select L/R or L+R.
When parametric EQ is adjusted, this setting will be turned
off.
6
Press the joystick up or down to select G-EQ
SETUP, then press the joystick right.
7
Press the joystick up or down to select the desired
channel, then press the joystick right.
8
Press the joystick up or down to select the desired
frequency.
9
Press the joystick left or right to adjust the level of
the desired frequency.
Adjustable level: -9 to +9
To adjust other frequencies, repeat steps 8 and 9.
To adjust other channels, repeat steps 7 and 9.
10
Press TA/RTN/SETUP to return to the previous
screen.
When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 32).
Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s centre frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
Check that Defeat mode is off (page 12).
2
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
3
Press the joystick up or down to select AP SETUP,
then press the joystick right.
The AP SETUP screen is displayed.
4
Press the joystick up or down to select P-EQ.
5
Press the joystick left or right to select L/R or L+R.
When graphic EQ is adjusted, this setting will be turned off.
6
Press the joystick up or down to select P-EQ
SETUP, then press the joystick right.
7
Press the joystick up or down to select the desired
channel, then press the joystick right.
8
Press the joystick up or down to select the desired
band, then press the joystick right.
9
Press the joystick up or down to select the desired
item, then press the joystick left or right to adjust
the desired mode.
To adjust other bands, repeat steps 8 and 9.
To adjust other channels, repeat steps 7 and 9.
10
Press TA/RTN/SETUP to return to the previous
screen.
When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 32).
It is not possible to adjust the frequencies of adjacent bands within 7
steps.
Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
L/R: Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
FREQUENCY: Selects the frequency.
LEVEL: Adjusts the level.
Adjustable level: -9 to +9
Q: Adjust the bandwidth.
Adjustable bandwidth: 0.5/1/2/3/4/5
01GB00VPAB222R.book Page 35 Monday, January 23, 2006 4:24 AM
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 76 77

Comments to this Manuals

No comments