Alpine INE-W970BT Owner's Manual download pdf (Page 19)

19-EN

01GB05INE-W970BT.fm

ALPINE INE-W970BT 68-25285Z06-A (EN)

Display example for Radio main screen

Band display

Frequency display

Preset button

SEEK mode

Listening to the Radio

Press the (AUDIO) button.

Touch [Radio] of Top banner.

The radio mode is activated and the display changes to the

Radio mode screen.

• The display content varies depending on the last band selected.

([RadioFM1], etc.)

Touch [Band] of Bottom banner to select the

desired radio band.

Each touch changes the bands as follows:

Touch [TUNE] to select the tuning mode.

* Displays only when the PTY tuning mode is selected. For

details, refer “PTY (Programme Type) Tuning” (page 21)

• There are two modes you can select for auto tuning, DX and

Local:

- DX (Distance) mode;

Both strong and weak stations will be tuned in.

- Local mode;

Only strong stations will be tuned in.

The initial setting is DX.

Touch [], [] or [], [] to change the

radio frequency up or down respectively.

In manual mode, touch and hold to change the frequency

continuously.

Presetting Stations Manually

Tune in a desired radio station you wish to store in

the preset memory by manual or automatic seek

tuning.

Touch and hold any one of the preset buttons for at

least 2 seconds.

The selected station is stored.

Repeat the procedure to store up to 5 other stations

onto the same band.

To use this procedure for other bands, simply select the

desired band and repeat the procedure.

A total of 30 stations can be stored in the preset memory

(6 stations for each band; FM1, FM2, FM3, MW or LW).

• If a preset memory has already been set in the same preset number, it

will be cleared and the new station will be memorised.

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations in the

selected band in ascending order of frequency.

After selecting the desired band, touch [A.Memo] of

Bottom banner.

The tuner automatically seeks and stores 6 strong stations into

the preset buttons in ascending order of frequency.

When automatic storing has completed, the station stored in the

preset 1 is selected.

• If no stations are stored, the tuner will return to the original station

you were listening to before the automatic storing procedure began.

• You can cancel this process by touching [A.Memo] while the tuner is

automatically seeking stations. Cancelling will return the tuner

preset to the previous setting.

Tuning to Preset Stations

You can tune in the preset stations in memory on either band using its

preset number.

Touch [Band] of Bottom banner repeatedly until the

desired band is displayed.

Touch any one of the preset buttons that has a

station stored to it.

The preset station is received.

Radio

FM-1 FM-2 FM-3 MW LW FM-1

DX SEEK Local SEEK MANUAL PTY*

01GB00INE-W970BT.book Page 19 Sunday, February 10, 2013 4:43 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Comments to this Manuals

No comments

Alpine INE-W970BT Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for Navigators Alpine INE-W970BT