search

Alpine CVA-1003R Owner's Manual Page 50

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 49
48-EN
Installation
Installing the Monitor
• Location
Before final installation, make sure the display
will not hamper gear shifting when it is opened
and closed in the chosen location.
NOTE
Install at an angle within 30 degrees from horizontal.
1
Slide mounting sleeve from main unit (see
Removal Procedure below). Slide the mounting
sleeve into the dashboard. Install the supplied
bracket to the monitor.
2
When your vehicle has the Bracket, mount the
long hex bolt onto the rear panel of the CVA-
1003R and put the Rubber Cap on the hex bolt. If
your vehicle does not have the Mounting Support,
reinforce the monitor unit with the metal mounting
strap (not supplied). Secure the ground lead of
the unit to a clean metal spot using a screw (
)
already attached to the vehicle's chassis.
Installation and Connections
3
Slide the CVA-1003R into the dashboard. When
the unit is in place, make sure the locking pins
are fully seated in the down position. This can be
done by pressing firmly in on the unit while
pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly
locked and will not accidentally come out from
the dashboard. Install the Supplied Front Frame.
Removal
1 Use a small screwdriver (or similar tool) to
push the locking pins to the "up" position (see
above drawing). As each pin is unlocked,
gently pull out on the unit to make sure it does
not re-lock before unlocking the second pin.
2 Pull the unit out, keeping it unlocked as you do
so.
<JAPANESE CAR>
Installation using the vehicle's Factory brackets.
NOTE
For the screw marked , use an appropriate screw for
the chosen mounting location.
Screws(M4x5)
(Included)
Mounting Bracket
(Included)
Dashboard
Mounting Sleeve
(Included)
CVA-1003R
Bracket
Rubber Cap
(Included)
Hex Bolt
(Included)
CVA-1003R
Screws
(M4x5)
Mounting Bracket
Ground Lead
Lock Pin
Screw
Hex Nut
(M5)
Chassis
Ground Lead
CVA-1003R
Front Frame
(Included)
Metal Mounting Strap
Bolt Stud
Page view 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments
Related products and manuals for CD players Alpine CVA-1003R
CD players Alpine CDA-118M User Manual   (74 pages)
CD players Alpine DHA-S690 User Manual   (46 pages)
CD players Alpine IVA-W205R Owner's Manual   (80 pages)
CD players Alpine CDA 9853 - Radio / CD User Manual   (45 pages)
CD players Alpine CDA-7865R Owner's Manual   (72 pages)
CD players Alpine CDA-9855 Owner's Manual    (49 pages)
CD players Alpine CDA-9807 User Manual   (25 pages)
CD players Alpine CDA-7990R User Manual   (52 pages)
CD players Alpine DHA-S690 User Manual   (84 pages)
CD players Alpine DHA-S680 User Manual  (21 pages)
CD players Alpine CDA-W560E Operations Instructions   (15 pages)
CD players Alpine CDM-7892R Owner's Manual    (30 pages)
CD players Alpine CDA-9811 User Manual   (3 pages)
CD players Alpine DHA-S690 User Manual   (48 pages)
CD players Alpine CDA-7998 Owner's Manual    (56 pages)
CD players Alpine DHA-S680 Owner's Manual   (66 pages)
CD players Alpine DHA-S680 User Manual   (65 pages)
CD players Alpine DVA-5205P User Manual   (72 pages)
CD players Alpine CDA-9807 Owner's Manual    (28 pages)
CD players Alpine CDM-7854E Owner's Manual   (19 pages)
  • Mermaid-technology Skeeter Defeater Yosan BRAX Accumac
  • Dell Supplementary music equipment Sony Radio receivers HoMedics Alarm clocks Panasonic Thermostats Pioneer Home cinema systems
  • Bitfenix Phenom Mini-ITX Asus VX228H Samsung SGH-S150G Honeywell RTH3100C
  • Owi AMP1SGB User Manual MOTU Audio Express User's Guide ASROCK 939SLI-ESATA2 Datasheet Sony DVP-NS755V User Manual Asus NX500 User Manual