Alpine XMA-T200RF Owner's Manual download pdf (Page 7)

5-EN

Storing XM Channel Presets

1 Press the BAND button on the Remote Control to

select the desired band (XM1 or XM2) you want to

store.

2 After tuning in the desired channel, press and hold the

rotary encoder of the Remote Display for at least 2

seconds until the channel name on the display blinks.

3 Turn the rotary encoder of the Remote Display to

select the preset No. you want to use.

4 Press the rotary encoder of the Remote Display to

store the channel while the channel name display is still

blinking (within 5 seconds).

The display stops blinking once the channel has been

memorized. The display shows the band, preset No.

and channel name memorized.

5 Repeat the procedure to store up to 5 other channels

onto the same band.

To use this procedure for other bands, simply select the

band desired and repeat the procedure.

A total of 12 channels can be stored in the preset

memory (6 channels for each band; XM1 and XM2).

NOTE

If you store a channel in a preset memory which already has a

station, the current channel will be cleared and replaced with the

new one.

Receiving Stored XM Channels

1 Press the BAND button on the Remote Control to

select the desired band (XM1 or XM2).

2 Press the 4 or 3 button of the Remote Display, or the

8 or 9 button of the Remote Control to find the desired

preset.

Category Search

Channels are divided into categories. Category Search

allows you to search for a specific channel by its

category. You can also do searches of all channels within

a particular category.

1 In XM mode, press the rotary encoder of the Remote

Display or the -/J button of the Remote Control to

display the category of the channel that is currently

selected for 13 seconds.

2 While the category is displayed, turn the rotary

encoder of the Remote Display, or press the g or

f button of the Remote Control to select a different

category (or leave it to stay with the same category.)

NOTE

You can also press the ( or ) button of the Remote Display

to select a category.

3 Within 13 seconds of selecting the category, press the

rotary encoder of the Remote Display or the -/J

button of the Remote Control again to select the next

channel within that category. Repeatedly press the

rotary encoder of the Remote Display or the -/J

button of the Remote Control within 13 seconds to

select additional channels within that category.

When tuned in, the category is displayed for 13

seconds, then the display returns to normal mode.

NOTES

•

If you cannot find your desired category, the display shows

“

”

for 2 seconds automatically.

• To exit the category search mode, press and hold the rotary

encoder of the Remote Display or the -/J button of Remote

Control for at least 2 seconds. Alternatively, wait for 13

seconds until the receiver returns to the normal channel

search mode.

Changing the Display

Text information, such as the channel name, artist

name/feature, and song/program title, is available with

most XM channels. The unit can display this text

information as explained below.

1 In XM mode, press the DISP button of the Remote

Display or the Remote Control.

Each time you press this button, the display changes

as shown below.

NOTES

• Depending on the model, the display may differ from the one

shown above.

• Press and hold the TITLE button of the Remote Control for at

least 2 seconds in the "SCR OFF" setting so that the display

scrolls one time only when a title exceeds 8 characters.

• When the "Scroll Setting" (refer to page 6) is set to "SCR

ON", the display scrolls only when entering a title of more

than 8 characters.

The display scrolls one time in the "SCR OFF" setting when a

title exceeds 8 characters, and when performing the operation

(Power On, Disc change, etc.).

Channel Name

display

→→→

Artist Name

display

Song Title

display

1 2 3 4 5 6 7 8 9 10 11 12 ... 42 43

Comments to this Manuals

No comments

Alpine XMA-T200RF Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Car media receivers Alpine XMA-T200RF