Alpine CDE-W233R Owner's Manual download pdf (Page 13)

13-EN

PI SEEK Setting

Press and hold AUDIO/SETUP (CDE-W235BT only) for at

least 2 seconds or press SETUP (CDE-W233R only) to

activate the SETUP mode.

Turn the Rotary encoder to select the TUNER mode, and

then press ENTER.

Turn the Rotary encoder to select PI SEEK, and then press

ENTER.

Turn the Rotary encoder to select ON or OFF.

Press and hold AUDIO/SETUP (CDE-W235BT only) for at

least 2 seconds or press SETUP (CDE-W233R only) to

return to normal mode.

Notes

•Press  to return to the previous mode.

• Pressing and holding  for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Setting the Time to automatically Adjust

When you set to ON, the time is automatically adjusted by RDS data.

Press and hold AUDIO/SETUP (CDE-W235BT only) for at

least 2 seconds or press SETUP (CDE-W233R only) to

activate the SETUP selection mode.

Turn the Rotary encoder to select “TUNER”, and then press

ENTER.

Turn the Rotary encoder to select “AUTO CLOCK”, and

then press ENTER.

Turn the Rotary encoder to select A-CLOCK ON or

A-CLOCK OFF.

Press and hold AUDIO/SETUP (CDE-W235BT only) for at

least 2 seconds or press SETUP (CDE-W233R only) to

return to normal mode.

Notes

•Press  to return to the previous mode.

• Pressing and holding  for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Receiving Traffic Information

Press and hold BANDTA for at least 2 seconds so that the

“TA” indicator lights up.

Press  or  to select your desired traffic information

station.

When a traffic information station is tuned in, the “TP” indicator

lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode. When a traffic information broadcast begins, the

unit automatically receives it and mute the audio source (CD, FM

radio, USB AUDIO, etc.). The display shows “TRF-INFO” for 2

seconds.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

Notes

• If you do not want to listen to the traffic information being received,

lightly press BANDTA to skip that traffic information message. The TA

mode will remain in the ON position to receive the next traffic

information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

Displaying Radio Text

Text messages from a radio station can be displayed.

Press VIEW while receiving FM in the radio mode to select

the Radio Text display.

The display will change every time the button is pressed.

If there is PS (Programme Service Name):

PS (Programme Service Name)

 RADIO TEXT 

PS (Programme Service Name)

* If VIEW is pressed and held for at least 2 seconds while

displaying PS in the radio mode, frequency will be displayed for

5 seconds.

If there is no PS (Programme Service Name):

FREQUENCY  RADIO TEXT  FREQUENCY

The display shows “WAITING” for a few seconds, then starts

scrolling the text message.

Note

• If there is no receivable text message or the unit cannot receive a text

message properly, the display shows “NO TEXT”.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Alpine CDE-W233R Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-W233R