Alpine CDE-W233R Owner's Manual download pdf (Page 41)

41-EN

Installation

CAUTION

Do not block the unit’s heat sink, thus preventing air circulation.

If blocked, heat will accumulate inside the unit and may cause a

fire.

* The illustration is for CDE-W235BT.

The main unit must be mounted within 30 degrees of the

horizontal plane, back to front.

Remove the mounting sleeve from the main unit (Refer to

“Removal” on page 41). Slide the mounting sleeve into the

dashboard and fix it with the metal shackles.

* If the installed mounting sleeve is loose in the dashboard, the

pressure plates may be bent slightly to remedy the problem.

When your vehicle has the Bracket, mount the long hex

bolt onto the rear panel of the CDE-W235BT/CDE-W233R

and put the Rubber Cap on the hex bolt. If your vehicle

does not have the Mounting Support, reinforce the head

unit with the metal mounting strap (not supplied). Secure

the ground lead of the unit to a clean metal spot using a

screw (

) already attached to the vehicle’s chassis.

Connect all the leads of the CDE-W235BT/CDE-W233R

according to details described in the CONNECTIONS

section.

* For the screw marked “

”, use an appropriate screw for the chosen

mounting location.

Slide the CDE-W235BT/CDE-W233R into the dashboard

until it clicks. This ensures that the unit is properly locked

and will not accidentally come out from the dashboard.

Insert the bracket keys into the unit, along the guides on

either side. The unit can now be removed from the

mounting sleeve.

Pull the unit out, keeping it unlocked as you do so.

Mounting the Microphone

(CDE-W235BT only)

For the sake of safety, mount the microphone in the following location.

• In a stable and secure location.

• In a location that does not inhibit safely driving the vehicle.

• Mount the microphone in a location where the driver’s voice can

easily be picked up.

Choose a location for the microphone that can easily pick up the drivers

voice. Requiring the driver to move towards the microphone for

audibility causes a distraction that could be dangerous.

Heat sink

Less than 30°

Rubber Cap (Included)

Bracket key

Hex Bolt

(Included)

Mounting Sleeve

(Included)

Dashboard

Pressure

Plates

This unit

Face Plate (Included)

Removal

Metal

Mounting

Strap

Screw

Bolt Stud

Hex Nut (M5)

This unit

Chassis

Ground Lead

This unit

Bracket keys

(Included)

1 ... 40 41 42 43 44

Comments to this Manuals

No comments

Alpine CDE-W233R Owner's Manual Page 41

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-W233R