search

Alpine PDX-F6 Owner's Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 1
ENGLISH
Introduction:
Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at
ALPINE hope that your new PDX-F6/F4 will give you many years of listening enjoyment.
In
case of problems when installing your PDX-F6/F4, please contact your authorized ALPINE dealer.
CAUTION: These controls are for tuning your system. Please consult your authorized Dealer for
adjustment.
Lf:.
WARNING
This symbol means important instructions.
Failure to heed them can result
in
serious injury or death.
Lf:.
CAUTION
This symbol means important instructions.
Failure to heed them can result
in
injury or property damages.
&WARNING
• DO NOT OPERATE ANY FUNCTION THATTAKES YOUR
ATIENTION
AWAY
FROM SAFELY DRIVING
YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a
complete stop. Always stop the vehicle
in
a safe location before performing these functions. Failure to do so may result
in
an accident.
• KEEP THE VOLUME
AT
A LEVEL WHERE
YOU
CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings,
etc.) can
be
dangerous and may result
in
an accident. LISTENING
AT
LOUD VOLUME LEVELS
IN
A CAR
MAY
ALSO
CAUSE HEARING DAMAGE.
• DO NOT DISASSEMBLE OR ALTER.
Doing so may result
in
an accident, fire or electric shock.
• USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may
result
in
fire, electric shock or other injury.
• USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result
in
fire or
electric shock.
• DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result
in
fire.
• MAKETHE CORRECT CONNECTIONS. Failure to make the proper connections may result
in
fire or product
damage.
• USE ONLY
IN
CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.)
Failure to do so may result
in
fire, etc.
• BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE
BATIERY
TERMINAL. Failure to do
so may result
in
electric shock or injury due to electrical shorts.
• DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN
SURROUNDING OBJECTS. Arrange wiring and
cables
in
compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or
hang up
on
places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
• DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of the wire and result
in
fire or electric shock.
• DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes
in
the chassis for
installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical
wiring. Failure to take such precautions may result
in
fire.
• DO NOT USE BOLTS OR NUTS
IN
THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other safety-related system), or
tanks should NEVER be used for installations or ground connections. Using such parts could disable control of
the vehicle and cause fire etc.
• KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OFTHE
REACH OF CHILDREN. Swallowing
them may result
in
serious injury. If swallowed, consult a physician immediately.
& CAUTION
• HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage
to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
• HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires
special technical skill and experience.
To
ensure safety, always contact the dealer where you purchased this
product to have the work done.
• USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified
accessory parts. Use of other than designated parts may damage this unit internally or may not securely install
the unit
in
place. This may cause parts to become loose resulting
in
hazards or product failure.
• ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the
cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through a hole
in
metal, use a rubber grommet to prevent
the wire's insulation from being cut by the metal edge of the hole.
• DO NOT INSTALL
IN
LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit
in
locations
with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result
in
product
failure.
Page view 1
1 2 3 4 5 6 7 ... 10 11

Comments to this Manuals

No comments
Related products and manuals for Car audio amplifiers Alpine PDX-F6
Car audio amplifiers Alpine MRV-F357 User Manual    (20 pages)
Car audio amplifiers Alpine TDA-7563 Owner's Manual     (2 pages)
Car audio amplifiers Alpine CDA-D857 Owner's Manual     (2 pages)
  • Apache Technologies SFD Fuelab Cooper Lighting Siren Players
  • Init Flat panel desk mounts Acura Cars Chauvet Unknown Approx Tablets Siemens Circular saws
  • Philips Radio reloj JVC FS-L30 LG P8071N3FA Casio FX-991ES
  • Tripp Lite SS7619-15 Specifications Samsung HT-Z210 User Manual Canon PIXMA MP282 User Manual Samsung SM-G361F User Manual Avent SCF784/00 User Manual