Alpine TDM-7590R Owner's Manual download pdf (Page 9)

7-EN

Basic

Setting the Treble Control

You can change the Treble Frequency emphasis

to create your own tonal preference.

1 Press the TREBLE C. button to turn on the

Treble setting mode.

2-1

Setting Treble frequency:

Press g DN or f UP button to select the

desired Treble center frequency.

10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz

Emphasizes the displayed Treble frequency

ranges.

2-2

Setting Treble Level:

Press the

5 or

6 button to select the desired

Treble Level (-7~+7).

You can emphasize the treble frequency.

NOTES

• If no buttons are pressed within 5 seconds, the Treble

control setting will be turned off automatically.

• The settings of the Treble will be individually

memorized for each source (FM, MW (LW), tape,

changer and AUX) until the setting is changed.

Changing Audio Level Display

Pattern

1 Press the DISP button to switch the display

pattern.

DISP1:

Lights the Volume indicator and Audio Level

indicator.

DISP2:

Lights the mode and value bars to show the

settings in the Bass engine display.

NOTE

The last mode set will remain in effect. The mode and

value bars light and show the Bass engine settings.

DISP OFF:

Turns off the light in Bass engine display.

If you set DISP OFF, the Volume indicator, Audio

Level indicator, and Bass engine displays are not

lit at all times.

Setting the AUX Mode

You can input TV/video sound by connecting an

optional "M-Bus V-Link" (M-Bus/RCA interface

cable KCM-122B) to this component.

1 Press and hold the SETUP button for at least 3

seconds.

2 Press the g DN or f UP button to select

the AUX mode.

3 Press the BAND button to toggle the mode

between AUX ON and AUX OFF.

4 Press the SETUP button to return to normal

mode.

5 To adjust the volume, etc., first press the

SOURCE button and select the AUX mode, then

make the necessary adjustment.

→ TUNER → TAPE → AUX

NOTE

When AUX ON is selected, a CD Changer cannot be

used.

→ DISP1 → DISP2 → DISP OFF

Audio Level indicator

Volume indicator

Example settings:

Bass centre frequency:

100 Hz

Bass band width: WIDE1

Bass level: - 6

→ FM LV ←→ REG ←→ SUB ←

→ AUX ←→ 100kHz/50kHz ←

1 2 3 4 5 6 7 8 9 10 ... 28

Comments to this Manuals

No comments

Alpine TDM-7590R Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Receiver Alpine TDM-7590R