Alpine DVA-9861Ri User Manual download pdf (Page 67)

66-EN

01GB06DVA9861Ri.fm

ALPINE DVA-9861Ri 68-04123Z62-A (EN)

Vehicle Display Interface Connector

Outputs Vehicle Display Interface control signals. Connect

this to the optional Vehicle Display Interface box.

For details about connections, consult your nearest Alpine

dealer.

Ai-NET Connector

Connect this to the output or input connector of other

product (CD changer, Equalizer, etc.) equipped with Ai-NET.

Ai-NET Cable (Included with CD Changer)

iPod Direct Connector

Control iPod signals.

Connect this to an iPod, using the FULL SPEED™

Connection Cable (included).

FULL SPEED™ Connection Cable (included)

Remote Control Input Lead (White/Brown)

Connect the external Alpine product to the remote control

output lead.

Monitor Control Lead (White/Pink)

Connect this to the Monitor Control Lead of the touch panel-

compatible monitor.

Video Output Connector

This connector is used in combination with the video inputs

of another video product. (Touch panel compatible monitor,

etc.)

Antenna Receptacle

ISO/JASO Antenna Adapter (sold separately)

ISO/JASO Antenna Adaptor may be required, depending on

the vehicle.

Audio Interrupt In Lead (Pink/Black)

Connect this lead to the Audio Interface output of a cellular

phone which provides ground shorting when a call is

received.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

Dimmer Lead (Orange)

This lead may be connected to the vehicle’s instrument

cluster illumination lead. This will enable the vehicle’s

dimmer control to dim the backlighting of the unit.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse

box or another unused power source which provides (+)

12V only when the ignition is turned on or in the accessory

position.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.

Make sure the connection is made to bare metal and is

securely fastened using the sheet metal screw provided.

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna,

if applicable.

• This lead should be used only for controlling the vehicle's

power antenna. Do not use this lead to turn on an amplifier or a

signal processor, etc.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s

battery.

ISO Power Supply Connector

ISO Connector (Speaker Output)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black)

Left Front (+) Speaker Output Lead (White)

Left Front (–) Speaker Output Lead (White/Black)

Right Front (–) Speaker Output Lead (Grey/Black)

Right Front (+) Speaker Output Lead (Grey)

Right Rear (–) Speaker Output Lead (Violet/Black)

Right Rear (+) Speaker Output Lead (Violet)

Digital Output Terminal (Optical)

Use when combining optical digital input compatible

products.

Steering Remote Control Interface Connector

To steering remote control interface box.

• Use a steering remote control extension cable if necessary.

Rear Output RCA Connectors

RED is right and WHITE is left.

Front Output RCA Connectors

RED is right and WHITE is left.

Subwoofer Output RCA Connectors

RED is right and WHITE is left.

System Switch

When connecting a processor using Ai-NET, place this

switch in the EQ/DIV position. When no device is

connected, leave the switch in the NORM position.

• Be sure to turn the power off to the unit before changing the

switch position.

Power Supply Connector

RCA Extension Cable (sold separately)

Fuse Holder (10A)

01GB00DVA9861Ri.book Page 66 Wednesday, December 7, 2005 12:00 PM

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 75 76

Comments to this Manuals

No comments

Alpine DVA-9861Ri User Manual Page 67

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Alpine DVA-9861Ri