Alpine CDE-171R Owner's Manual download pdf (Page 30)

30-EN

IMPORTANT

Installation

CAUTION

When you install this unit in your car, do not remove the

detachable front panel.

If the detachable front panel is removed during installation, you

might press too hard and warp the metal plate that holds it in

place.

The main unit must be mounted within 35 degrees of the

horizontal plane, back to front.

Remove the mounting sleeve from the main unit (Refer to

“Removal” on page 30). Slide the mounting sleeve into the

dashboard and fix it with the metal shackles.

* If the installed mounting sleeve is loose in the dashboard, the

pressure plates may be bent slightly to remedy the problem.

When your vehicle has the Bracket, mount the long hex

bolt onto the rear panel of the CDE-171R/CDE-171RR/

CDE-171RM/CDE-170R/CDE-170RR/CDE-170RM and put

the Rubber Cap on the hex bolt. If your vehicle does not

have the Mounting Support, reinforce the head unit with

the metal mounting strap (not supplied). Connect all the

leads of the CDE-171R/CDE-171RR/CDE-171RM/

CDE-170R/CDE-170RR/CDE-170RM according to details

described in the CONNECTIONS section.

* For the screw

, provide a proper screw to the chassis installing

location.

Slide the CDE-171R/CDE-171RR/CDE-171RM/CDE-170R/

CDE-170RR/CDE-170RM into the dashboard until it clicks.

This ensures that the unit is properly locked and will not

accidentally come out from the dashboard. Install the

detachable front panel.

Remove the detachable front panel.

Insert the bracket keys into the unit, along the guides on

either side. The unit can now be removed from the

mounting sleeve.

Pull the unit out, keeping it unlocked as you do so.

JAPANESE CAR

Please record the serial number of your unit in the space provided

below and keep it as a permanent record. The serial number or the

engraved serial number is located on the bottom of the unit.

SERIAL NUMBER: [ ]

INSTALLATION DATE: [ ]

INSTALLATION TECHNICIAN: [ ]

PLACE OF PURCHASE: [ ]

Less than 35°

Rubber Cap (Included)

Bracket

Hex Bolt

(Included)

Mounting Sleeve

(Included)

Dashboard

Pressure Plates*

This unit

Removal

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

This unit

Bracket keys

(Included)

This unit

Front Frame

Screw (M5 × 8)

(Included)

This unit

Mounting Bracket

1 2 ... 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Alpine CDE-171R Owner's Manual Page 30

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-171R