Alpine CDA-9883R Owner's Manual download pdf (Page 27)

26-EN

01GB05CDA-9883R.fm

ALPINE CDA-9883R 68-08564Z11-A (EN)

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be connected to this unit

if it is Ai-NET compatible. With a CD Changer connected to the Ai-

NET input of this unit, the CD Changer will be controllable from this

unit.

Using the KCA-400C (Multi-Changer Switching device) or the KCA-

410C (Versatile Link Terminal) multiple changers can be controlled by

this unit.

See “Multi-Changer Selection (Optional)” on page 26 for selecting the

CD Changers.

• The controls on this unit for CD Changer operation are operative

only when a CD Changer is connected.

• The DVD changer (optional) is controllable from this unit as well as

the CD changer.

Press SOURCE/ to activate the CHANGER mode.

The display shows the disc number and track number.

• The source indicator varies depending on the connected source.

• Press BAND/TA to switch the Disc mode in the Changer mode.

Press FUNC./SETUP to activate the disc selection

mode.

Press the disc select buttons (1 through 6)

corresponding to one of the discs loaded in the CD

Changer.

The selected disc number appears in the display and

CD/MP3 playback starts.

• After selecting the desired disc, you can operate in the same way as

for the CD player of this unit.

For details, please see the CD/MP3/WMA/AAC section.

* When a 12-disc CD changer is connected.

Playing MP3 Files with the CD Changer

(Optional)

If you connect a changer compatible with MP3, you can play CD-

ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.

Press SOURCE/ to switch to the MP3 Changer

mode.

Press FUNC./SETUP to activate the disc selection

mode.

M.I.X./REPEAT operation mode Disc selection mode

M.I.X./REPEAT operation mode

Press any one of the disc select buttons

(1 through 6) corresponding to one of the discs

loaded in the CD Changer.

To pause playback, press //ENT.

Pressing / /ENT again will resume playback.

• The unit can play discs containing both audio data and MP3 data.

• For operating MP3 with an MP3 compatible CD Changer, refer to

“CD/MP3/WMA/AAC” pages 12 to 15.

Multi-Changer Selection (Optional)

Alpine’s Ai-NET system will support up to 6 CD Changers. When

operating two or more changers, the KCA-400C (Multi-Changer

Switching device) must be used. If you use 1 Switching device, you can

connect up to 4 CD Changers. If you use 2 Switching devices, you can

connect up to 6 CD Changers. When using KCA-410C (Versatile Link

Terminal), you can connect two changers and two external outputs

(AUX).

Press SOURCE/ on this unit to activate the CD

Changer mode.

Press BAND/TA to activate the CD Changer

Selection mode.

The CD Changer Selection mode remains active for several

seconds.

Press BAND/TA until the desired CD Changer

indicator appears on the display.

• If the selected CD Changer is not connected, the display will show

“NO CHANGER-(No.)”.

• To operate the selected changer, see “CD/MP3/WMA/AAC”

(pages 12-15).

• For further details about the external input (AUX) when using KCA-

410C, see “Setting the AUX Mode (V-Link)” on page 21.

Changer (Optional)

Select buttons

(1 through 6)

BAND/TA

SOURCE

FUNC./SETUP

//ENT

Disc Select Mode

(Disc No.1~6)

Disc Select Mode*

(Disc No.7~12)

RPT/M.I.X. Mode

Disc Select Mode

(Disc No.1~6)

01GB00CDA-9883R.book Page 26 Friday, November 17, 2006 8:25 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Comments to this Manuals

No comments

Alpine CDA-9883R Owner's Manual Page 27

Comments to this Manuals

Related products and manuals for Receiver Alpine CDA-9883R