Alpine Navigation Radio Operations Instructions download pdf (Page 21)

21-EN

01GB05IVA-W520E.fm

ALPINE IVA-W520E 68-16909Z32-A (EN)

Adjusting the Audio

Press SETUP on the unit.

The SETUP main screen is displayed.

• Touch [ ] on the source selection screen can also display the

SETUP main screen.

Touch [] of Audio Setup.

The Audio Setup screen appears.

• After setting Option Key to “Audio Setup” (page 32), the Audio Setup

screen can be activated directly by pressing .

Display Example for Audio Setup Screen

• When the optional IMPRINT audio processor (PXA-H100) or an

external audio processor is connected, the “A.Processor” list is

displayed. For details on operation, refer to “IMPRINT Operation

(Optional)” (page 33) or “External Audio Processor Operation

(Optional)” (page 39).

• Touching [ ] or [ ] will scroll the list one line at a time.

• Touching [ ] or [ ] will scroll the list one page at a time.

• Touching [Exit] will change to the main source screen.

• Touching [ ] to return to the previous screen.

... This item is controllable with the IVA-W520E only.

... This item is available when the optional IMPRINT

audio processor (PXA-H100) is connected.

...This item is available when an External Audio

Processor is connected.

Adjusting Balance/Fader

Touch [] of Balance/Fader, the adjusting screen of

Balance/Fader will be displayed.

Display Example for Balance/Fader Screen

Adjusting the Fader

Touch [F] or [R] to adjust the volume of the front and

rear speakers.

Setting range: F15 to R15

• If an optional IMPRINT audio processor (PXA-H100) is connected

to this unit and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/

SUBW.) switch to 2.2ch (3WAY), you cannot adjust the FADER mode.

For details, refer to the Owner’s Manual of PXA-H100.

Adjusting the Balance

Touch [L] or [R] to adjust the sound volume of the left

and right speakers.

Setting range: L15 to R15

Adjusting the Balance/Fader Directly

Touch and move [] to a desired setting.

Or touch a desired setting range, and [] will move to that

location.

Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.

Adjusting Bass/Treble

You can change the bass/treble frequency emphasis to

create your own tonal preference.

Touch [] to display the Bass/Treble adjusting screen.

Touch [] or [] on the scroll bar to scroll the setup items line

by line.

• Adjustment cannot be performed when Defeat is set to ON.

• If OFF is set in “Changing MultEQ mode” (page 33) when the

IMPRINT audio processor is connected, the list is not displayed.

Setting the Bass level

You can emphasise or weaken the bass frequency.

Touch [] or [] of Bass Level to select the desired bass level.

Setting range: –7 to +7

Setting the Bass Centre Frequency

The displayed bass frequency is emphasised.

Touch [] or [] of Bass Freq. to select the desired bass centre

frequency.

Setting range: 60 Hz, 80 Hz, 100 Hz, 200 Hz

Setting the Bass Bandwidth

Changes the boosted bass bandwidth to wide or narrow.

A wider setting will boost a wide range of frequencies

above and below the centre frequency. A narrower

setting will boost only frequencies near the centre

frequency.

Touch [] or [] of Bass Bandwidth to select the desired bass

band width.

Setting range: Wide1 to Wide4

• The bass level settings will be individually memorized for each

source (FM, AM, CD, etc.) until the setting is changed. The bass

frequency and bass bandwidth settings adjusted for one source are

effective for all other sources (FM, AM, CD etc.).

Setting the treble level

You can emphasise the treble frequency.

Touch [] or [] of Treble Level to select the desired treble

level.

Setting range: –7 to +7

Other Useful

Features

01GB00IVA-W520E.book Page 21 Thursday, June 10, 2010 4:15 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 70 71

Comments to this Manuals

No comments

Alpine Navigation Radio Operations Instructions Page 21

Comments to this Manuals

Related products and manuals for Radios Alpine Navigation Radio