Alpine Navigation Radio Operations Instructions download pdf (Page 11)

11-EN

01GB05IVA-W520E.fm

ALPINE IVA-W520E 68-16909Z32-A (EN)

Inserting/Ejecting a Disc

Press on the unit.

The display changes to the Eject/Tilt screen.

Insert a disc:

Touch [Open] on the Eject/Tilt screen.

The movable monitor will open, then insert a disc into the

disc slot. Inserting a disc will close the monitor

automatically.

Eject the disc:

Touch [Eject] of Disc on the Eject/Tilt screen.

The movable monitor will open. Then the disc is ejected.

After remove the disc, touch [Close] to close the movable

monitor.

• Touching [Exit] returns to the earlier main source screen.

• Do not apply shock to the movable monitor when it is open as it may

result in malfunction of the unit.

• The monitor may be dim during low temperature and immediately

after turning on the power. The brightness will return to normal as

time elapses.

• The monitor will stop at the set tilt angle when closing.

Adjusting the Monitor Viewing Angle

Adjust the monitor’s angle for better visibility.

Press on the unit.

The display changes to the Eject/Tilt screen.

Touch [] or [] of Tilt to adjust the desired

monitor angle.

The monitor angle can be adjusted in 5 stages.

Touch [

Exit

] to return to the previous screen.

• If the monitor touches an obstacle while the angle is being adjusted,

it will stop immediately.

• The screen colour will vary when viewed at certain angles. Adjust the

screen angle for the best viewing position.

• If the voltage of the vehicle’s battery power is low, the screen may

blink when the screen angle is changed. This is normal and not a

malfunction.

Adjusting the Volume

Adjust the volume by pressing or .

Volume decreases/increases continuously by pressing and

holding or .

Volume: 0 - 35

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume

level by 20 dB.

Press

MUTE

to activate the MUTE mode.

The audio level will decrease by about 20 dB.

Pressing

MUTE

again will bring the audio back to its

previous level.

How to view the Display

• Be sure to touch the button lightly with the pad of your finger on the

display to protect the display.

• If you touch a button and there is no reaction, remove your finger

from the display, and try again.

Here is an example explanation for the Radio mode display on how to

recall a source.

Press

SOURCE/

on the unit.

The SOURCE selection screen is displayed.

Display example for SOURCE selection screen

CAUTION

Keep hands (or any other object) away from the monitor while it

is opening or closing to avoid damage or injury. The back of the

movable monitor will get very warm under normal operating

conditions. This is not a malfunction. Do not touch.

Disc Slot

Soft button operation

About the button descriptions used in this Owner’s Manual

• Soft buttons, ones found in the display, are shown in bold

enclosed in brackets, [ ] (e.g. [Exit]).

• When a soft button and a head unit button have the same

function, the explanations in this Owner’s Manual will describe

the function of the soft button.

Recalling the Source

01GB00IVA-W520E.book Page 11 Thursday, June 10, 2010 4:15 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

Comments to this Manuals

No comments

Alpine Navigation Radio Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for Radios Alpine Navigation Radio