Alpine IVA-D901 Owner's Manual download pdf (Page 9)

3 Connect the power lead to this unit.

Insert until a click sound is heard.

4 Wrap electrical tape around end of leads not

used.

5 Connect the battery (–) terminal and turn the

ignition key to the ACC or ON position. Check

to see if operation can be performed properly.

(Is the power turned on? Is the illumination

turned on?)

You can check the language selection menu with

the monitor. (Refer to the Owner’s Manual for

details.) Go to step 6 after checking is completed.

Note:

Before connecting the battery terminal, check the battery

voltage using the multimeter and make sure that it

registers at least 12V.

6 Turn the ignition key to the OFF position to

turn off the power after completion of the

check.

OFF

7 Pull out the ignition key and remove the

battery terminal (–) again to begin installation

procedure.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

No comments

Alpine IVA-D901 Owner's Manual Page 9