Alpine CVA-1005R Owner's Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
2
GUIDE FOR INSTALLATION AND CONNECTIONS
FOR AUTHORIZED ALPINE DEALERS
Please read this GUIDE FOR INSTALLATION
AND CONNECTIONS FOR AUTHORIZED
ALPINE DEALERS and the OWNER’S MANUAL
thoroughly to familiarize yourself with each control
and function. We at ALPINE hope that your new
NVE-N077PS will give you many years of
enjoyment.
In case of problems when installing your unit, please
contact your authorized ALPINE dealer.
Points to Observe for Safe Usage
For safe operation of this system, please read this
manual carefully. We cannot be responsible for
problems resulting from failure to observe the
instructions in this manual.
Pictorial displays are used to point out safety tips
to prevent harm to yourself or others and property
damage. Here is what these pictorial displays
mean. Knowing them is important to understand
this manual.
Meaning of displays
BEFORE WIRING, DISCONNECT THE CABLE
FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury
due to electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTAN-
GLED IN SURROUNDING OBJECTS. Arrange
wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring
that obstruct or hang up on places such as the
steering wheel, shift lever, brake pedals, etc. can be
extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to
other equipment. Doing so will exceed the current
carrying capacity of the wire and result in fire or
electric shock.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR SHIFT LEVER. Doing so
may obstruct forward vision or hamper movement
etc. and results in serious accident.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES. When drilling holes in the
chassis for installation, take precautions so as not to
contact, damage or obstruct pipes, fuel lines, tanks
or electrical wiring. Failure to take such precautions
may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE
OR STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS. Bolts or nuts used for the brake or
steering systems (or any other safety-related sys-
tem), or tanks should NEVER be used for installa-
tions or ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
DO NOT INSTALL THE MONITOR NEAR THE
PASSENGER SEAT AIR BAG. If the unit is not
installed correctly the air bag may not function
correctly and when triggered the air bag may cause
the monitor to spring upwards causing an accident
and injuries.
MAKE THE CORRECT CONNECTIONS. Failure to
make the proper connections may result in fire or
product damage.
Warning
Warning
Caution
DO NOT DISASSEMBLE OR ALTER. Doing so may
result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT
OF THE REACH OF CHILDREN. Swallowing them
may result in serious injury. If swallowed, consult a
physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES. Failure to do so may result in
fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND. (Check with your dealer if you are not
sure.) Failure to do so may result in fire, etc.
This symbol means important
instructions. Failure to heed them
can result in injury or material
property damage.
This symbol means important
instructions. Failure to heed them
can result in serious injury or
death.
PRECAUTIONS
Page view 1
1 2 3 4 5 6 7 ... 12 13

Comments to this Manuals

No comments