Alpine CDE-110UB Owner's Manual download pdf (Page 20)

18-EN

USB Memory Connection (Optional)

Connect USB memory

Open the cover of the USB connection terminal.

Connect the USB memory directly to the USB

connection terminal, or via the USB cable.

Remove USB memory

Carefully, pull out the USB memory from the USB

cable or the USB connection terminal.

Close the cover of the USB connection terminal.

• Change to a source other than the USB memory mode, then remove

the USB memory. If the USB memory is removed in the USB memory

mode, data may be damaged.

• When removing USB memory, pull it out straight.

• If sound is not output or USB memory is not recognized even when

USB memory is connected, remove USB memory once, then connect

it again.

• Route the USB cable away from other cables, etc.

• After removing the USB memory, close the cover of the USB

connection terminal to prevent dust or foreign objects from entering

and causing a malfunction.

About MP3/WMA/AAC File of USB

Memory

Playing back MP3/WMA/AAC

MP3/WMA/AAC files are prepared, then stored to a USB

memory. This unit can recognize at least 100 folders (including

root folder) and 100 files per folder stored in USB memory.

Playback may not be performed if a USB memory exceeds the

limitations described above.

Do not make a file’s playback time more than 1 hour.

Media supported

This device can play back USB memory media.

Corresponding File Systems

This device supports FAT 12/16/32 for USB memory device.

An iPhone/iPod can be connected to this unit by using the proprietary

ALPINE FULL SPEED

™

Connection Cable (KCE-433iV) (sold

separately). When this unit is connected by using the cable, the controls

on the iPod are not functional.

• Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer

“Setting the AUX+ SETUP Mode” on page 17).

• If the Bluetooth INTERFACE (KCE-400BT) and an iPhone/iPod are

connected at the same time, be sure to disconnect the iPhone/iPod

from the Bluetooth INTERFACE (KCE-400BT) while turning ACC to

OFF.

• If you connect an iPhone to this unit, it can be used as an iPod. If you

use iPhone as a hands-free phone, you need the optional Bluetooth

INTERFACE (KCE-400BT).

• Internet and telephone functions of iTouch or iPhone, etc., can also

be used when connecting to the unit. However, using these functions

will stop or pause the playing songs, at this time do not operate the

unit to avoid a malfunction.

• Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to

high temperature and humidity conditions, and damage may result.

iPhones/iPods usable with this unit

• The unit can be used with the fifth generation and above

iPod, iPhone 3G, iPhone, iPod classic, iPod touch, the first

generation iPod nano, the second generation iPod nano or

the third generation iPod nano only. iPod Shuffle cannot be

used, however.

• Touch wheel or scroll wheel type iPods without the dock

connector cannot be connected to the unit.

• The unit can be used with the following iPhones/iPods.

iPhone 3G (version 2.0)

iPhone (version 1.1.4)

iPod touch (version 1.0.4)

iPod classic (version 1.1.1)

iPod nano (3rd generation) (version 1.1)

iPod nano (2nd generation) (version 1.1.3)

iPod with video (version 1.2.3)

iPod nano (1st generation) (version 1.3.1)

• For clarity in identifying your model of iPod, please see

Apple’s own document “Identifying iPod models” at

http://support.apple.com/kb/HT1353

• This unit does not support iPhone/iPod’s video playback

function, even using a video-compatible cable.

• If the unit is used with versions of iTunes earlier than 7.6,

correct function and performance are not guaranteed.

USB memory

(Sold Separately)

Cable (Sold

Separately)

USB memory

(Sold Separately)

USB Connection Terminal

This unit

iPhone/iPod

(Optional)

VIEW

ENT

Rotary encoder

/MUTE

/ESC

Preset buttons

(1 through 6)

SOURCE/

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

Comments to this Manuals

No comments

Alpine CDE-110UB Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Car video systems Alpine CDE-110UB