Alpine SEC-150R Owner's Manual download pdf (Page 13)

13-EN

Adjusting Subwoofer Level/Bass Level/Mid

Level/Treble Level/Balance (Between Left

and Right)/Fader (Between Front and Rear)/

Loudness/Defeat

Press AUDIOSETUP repeatedly to choose the desired

mode.

Each press changes the mode as follows:

SUBWOOFER

*1/*3

 BASS LEVEL

*2/*3

 MID LEVEL

*2/*3



TRE LEVEL

*2/*3

 BALANCE  FADER  LOUDNESS

*2/*3



DEFEAT  VOLUME  SUBWOOFER

*1 When the SUBWOOFER mode is set to OFF, its level cannot be

adjusted.

*2 Adjustable only when DEFEAT is OFF.

*3 Not displayed when BASS ENGINE SQ mode is on. (Page 14)

Note

• If no operation is performed for 5 seconds, the unit automatically

returns to normal mode.

Turn the Rotary encoder until the desired sound is

obtained in each mode.

By setting DEFEAT ON, previously adjusted settings of BASS,

MID, TRE LEVEL and LOUDNESS will return to the factory

defaults.

Audio Setup

You can flexibly customize the unit to suit your own preference and

usage. From the AUDIO SETUP menu, Audio Setting can be modified.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select AUDIO, and then press

ENTER.

Note

• When BASS ENGINE SQ setting is set to OFF (MANUAL SET)

(page 14), you can also activate the Audio Setup mode directly by

pressing BASS.

Turn the Rotary encoder to select the desired sound

setting menu, and then press ENTER.

EQ PRESETS

*1/*3/*4

 BASS ENGIN

 LOUDNESS

*1/*3



3BAND EQ

*1/*3/*4/*5

 SOURCE VOL  SUBWOOFER 

SUBW LPF

*1/*3/*6

 SUBW PHASE

*6/*7

 SUBW SYS

*3/*6



POWER IC

(e.g. Select SUBWOOFER)

*1 Adjustment cannot be performed when DEFEAT is set to ON.

*2 Not displayed when the Audio Setup mode is activated by

pressing BASS in MANUAL SET mode (page 16).

*3 These items are set uniformly in BASS ENGINE SQ mode by

adjusting BASS ENGINE SQ Level (page 16) and cannot be

adjusted separately. If you want to change these settings

separately, a message is displayed asking you to confirm that you

want to exit the BASS ENGINE SQ mode. Select “YES” to make

the setting.

*4 Any changes made to either EQ PRESETS or 3BAND EQ are

reflected in the other’s settings.

*5 In step 3, three sound adjustment items (Bass, Mid and Treble)

can be selected in 3BAND EQ mode. Turn the Rotary encoder

to select the desired item, and then press ENTER to continue

to step 4.

*6 These functions are inoperable when SUBWOOFER is set to

OFF.

*7 This function is inoperable when SUBW LPF is set to OFF

(page 15).

Turn the Rotary encoder to change the setting, and then

press ENTER.

(e.g. Select SUBW ON or SUBW OFF)

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Pressing r returns to the previous Sound menu mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, Sound menu mode is

canceled.

Sound Setting

Subwoofer +0 ~ +15

Bass level −7 ~ +7

Mid level −7 ~ +7

Treble level −7 ~ +7

Balance L15 ~ R15

Fader R15 ~ F15

Loudness ON/OFF

Defeat ON/OFF

Volume 0 ~ 35

/ENTER



AUDIO/SETUP

BASS

Rotary encoder

Use steps 1 to 5 to select one of the setting modes to modify.

See the applicable section below for details about the

selected setting item.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Comments to this Manuals

No comments

Alpine SEC-150R Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Car media receivers Alpine SEC-150R