Alpine IVE-W535BT Owner's Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
45-EN
01GB05IVE-W535BT.fm
ALPINE IVE-W535BT 68-21057Z54-A (EN)
EN
DE
IT
FR
ES
SE
NL
PL
RU
GR
Adjusting the Time Correction (Time
Correction)
[Time Correction] is selected on the Sound setup menu in step 3. Refer
to “Sound Setup Operation” (page 42).
Before performing the following procedures, refer to “About Time
Correction” (page 46).
Setting item: Time Correction
1
Touch [ms] or [cm] to select mode for making
adjustments.
Each time you touch, the onscreen button and correction
mode changes.
ms: Adjust time.
cm: Adjust listening position and distance from each speaker.
2
Touch [] or [] for each speaker to adjust the
time or distance.
0.0msec to 9.9msec (0.1msec/step)
0.0cm to 336.6cm (3.4cm/step)
All speaker setting values are adjustable in the range of 20ms or
680cm.
3
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
Touch [Flat] to set all values to 0.0.
If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot
be edited (Refer to page 42).
If the Subwoofer setting is “Off,” the Subwoofer setting cannot be
edited (Refer to page 42).
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset1], [Preset2], or [Preset3] on the time
correction screen.
The setting stored in the Preset will be recalled.
Adjusting the Crossover Settings (X-
OVER)
[X-OVER] is selected on the Sound setup menu in step 3. Refer to
“Sound Setup Operation” (page 42).
Before performing the following procedures, refer to “About the
Crossover” (page 48).
Setting item: X-OVER
1
Touch [Channel] to select the channel.
Each time you touch, the channel switches.
The channel being adjusted is displayed in red.
2
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [] or [] of “Freq.,” then select the cut-off
frequency.
Setting contents:20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) /
100 / 125 / 160 / 200 Hz
Adjusting the Slope
Touch [] or [] of “Slope,” then adjust the HPF or LPF
slope.
Setting contents: 0 (Initial setting) / 6 / 12 / 18 / 24 dB/oct
Adjusting the Level
Touch [] or [] of “Level,” then adjust the HPF or LPF
level.
Setting contents: -12 to 0 dB (Initial setting: 0)
3
Repeat steps 1 to 2 to make adjustment to the other
channels.
4
To store the adjusted setting value, touch and hold
[Preset1], [Preset2], or [Preset3] for at least 2
seconds.
Touch [Flat] to initialise all values.
If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot
be edited (Refer to page 42).
If the Subwoofer setting is “Off,” the Subwoofer setting cannot be
edited (Refer to page 42).
While adjusting the X-OVER you should consider the frequency
response of the connected speakers.
Correction mode
Front HPF Rear HPF Subw. LPF
01GB00IVE-W535BT.book Page 45 Sunday, August 5, 2012 6:45 PM
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 99 100

Comments to this Manuals

No comments