Alpine CDE-148EBT Operations Instructions download pdf (Page 13)

15-EN

Adjusting Subwoofer Level/Bass Level/

Treble Level/Balance (Between Left and

Right)/Fader (Between Front and Rear)/

Defeat

Press AUDIO repeatedly to choose the desired mode.

Each press changes the mode as follows:

SubW LEVEL

 BASS

 TREBLE

 BALANCE  FADER 

DEFEAT  VOLUME  SubW LEVEL

*1 When the Subwoofer mode is set to OFF, its level cannot be

adjusted, refer to “Turning Subwoofer ON/OFF” on page 16.

*2 Adjustable only when DEFEAT is OFF.

Note

• If no operation is performed for 5 seconds after selecting the Subw

LEVEL, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the

unit automatically returns to normal mode.

Turn the Rotary encoder until the desired sound is

obtained in each mode.

By setting DEFEAT ON, previously adjusted level settings of BASS

and TREBLE will return to the factory defaults.

Audio Setup

You can flexibly customize the unit to suit your own preference and

usage. From the AUDIO SETUP menu, Audio Setting can be modified.

Press and hold AUDIO/SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select Audio, and then press

ENTER.

Audio

 General  Display  Tuner  iPod&USB 

Application  Bluetooth

 Audio

*1 Adjustment cannot be performed during a call.

*2 Only for CDE-148EBT.

Turn the Rotary encoder to select the desired sound

setting menu, and then press ENTER.

Factory’s EQ

*3/*4

 Parametric EQ

*3/*5

 VOL LV ADJ 

Subwoofer  Subwoofer Phase

 Subwoofer System



Power IC  MX Setup

 TCR Parameter

 T.Correction



Spatial

 X-Over

 Factory’s EQ

*3 Adjustment cannot be performed when DEFEAT is set to ON.

*4 Any changes made to either Factory’s EQ or Parametric EQ are

reflected in the others’ settings.

*5 In step 3, nine sound adjustment items can be selected in

Parametric EQ mode. Turn the Rotary encoder to select the

desired item, and then press ENTER to continue to step 4.

*6 These functions are inoperable when Subwoofer is set to OFF.

Turn the Rotary encoder to change the setting, and then

press ENTER.

Press and hold AUDIO/SETUP for at least 2 seconds to

return to normal mode.

Notes

• Pressing r returns to the previous Sound menu mode.

• If no operation is performed for 60 seconds, Sound menu mode is

cancelled.

10 typical equalizer settings are preset at the factory for a variety of

musical source material. User settings are created in the Parametric EQ

mode.

User  Flat (Initial setting) Pops  Rock  News 

Jazz&Blues  Electrical Dance  Hip Hop&Rap 

Easy Listening  Country  Classical

Note

• The Parametric EQ is used to create the Factory’s EQ settings.

You can modify the Equalizer settings to create a response curve more

appealing to your personal taste.

After selecting Parametric EQ from the Audio Setup mode,

turn the Rotary encoder to select the desired band, then

press ENTER.

Sound Setting

Subwoofer Level 0 ~ 15

Bass level -7 ~ 7

Treble level -7 ~ 7

Balance –15(L) ~ 15(R)

Fader –15(R) ~ 15(F)

Defeat ON/OFF

Volume 0 ~ 35

/ENTER



AUDIO/SETUP

Rotary encoder

Preset buttons

(1 through 6)

Use steps 1 to 5 to select one of the setting modes to modify.

See the applicable section below for details about the

selected setting item.

Equalizer Presets (Factory’s EQ)

Adjusting the Parametric Equalizer Curve

(Parametric EQ)

00ALPINE.book Page 15 Friday, January 11, 2013 10:01 AM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 46 47

Comments to this Manuals

No comments

Alpine CDE-148EBT Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-148EBT