Alpine CDE-181RM User Manual download pdf (Page 9)

8-EN

Accessory List

• Head Unit ..................................................................................1

• Power Cable ..............................................................................1

• Mounting Sleeve ......................................................................1

•Carrying Case

(CDE-182R/CDE-181 Series/CDE-180 Series only) .................1

• Bracket Key ...............................................................................2

• Rubber Cap ...............................................................................1

• Hex Bolt.....................................................................................1

• Screw (M5 × 8) ..........................................................................4

• Owner’s Manual..................................................................1 set

Turning Power On and Off

Press SOURCE to turn on the unit.

Note

• The unit can be turned on by pressing any other button except  and

e (Release).

Press and hold SOURCE for at least 2 seconds to turn

off the unit.

Note

• The first time power is turned on, the volume will start from level 12.

Demonstration Function

This unit has a demonstration feature for display. When Demo mode is

set to ON (initial setting), the unit starts the demonstration if there is no

operation for 30 seconds.

When installing this unit in a car for the first time, the DEMO OFF

screen will be displayed for 30 seconds after turning on the unit.

Press ENTER within 30 seconds to turn off the

Demonstration mode

Otherwise, the Demo mode remains ON and the unit starts the

demonstration if there is no operation for 30 seconds.

* The operation is the same as setting DEMO MODE to OFF in the

Setup menu. However, if the unit is disconnected from the vehicle's

battery, DEMO MODE will be switched to ON automatically

when the unit is used next time. If you want to completely close the

Demo mode, set DEMO MODE to QUITE OFF. For details,

please refer to “Setting the Demonstration mode” on page 21.

Source Selection

Press SOURCE to change the source.

TUNER  DISC

 USB AUDIO/iPod

 AUXILIARY

 TUNER

*1 Only for CDE-182R/CDE-181 Series/CDE-180 Series.

*2 Only for CDE-182R/CDE-181 Series and when the iPod/iPhone

is connected.

*3 Only when AUX SETUP is set to ON. Refer to “Setting the AUX

SETUP mode” on page 21.

Detaching and Attaching the Front Panel

Notes

• The front panel may become hot in normal usage (especially the

connector terminals on the back of the front panel). This is not a

malfunction.

• To protect the front panel, place it in the supplied carrying case

(CDE-182R/CDE-181 Series/CDE-180 Series only).

• When detaching the front panel, do not apply excessive force as it may

result in malfunction.

Notes

• Before attaching the front panel, make sure that there is no dirt or dust

on the connector terminals and no foreign object between the front

panel and the main unit.

• Attach the front panel carefully, holding the sides of the front panel to

avoid pushing buttons by mistake.

Getting Started

SOURCE/



/ENTER



Rotary encoder

Detaching

Attaching

Online-store car audio and autogoods Winauto

winauto.ua

1 2 3 4 5 6 7 8 9 10 ... 35

Comments to this Manuals

No comments

Alpine CDE-181RM User Manual Page 9

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-181RM