Alpine CDE-181RM User Manual download pdf (Page 11)

10-EN

Presetting Stations Automatically

Press BAND repeatedly until the desired radio band is

displayed.

Press and hold TUNEA.ME for at least 2 seconds.

The frequency on the display continues to change while the

automatic memory is in progress. The tuner will automatically

seek and store 6 strong stations in the selected band. They will

be stored into preset buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner

goes to the station stored in preset location No.1.

Note

• If no stations are stored, the tuner will return to the original station you

were listening to before the auto memory procedure began.

Tuning to Preset Stations

Press BAND repeatedly until the desired band is

displayed.

Press any one of the station preset buttons (1 through 6)

that has your desired radio station in memory.

The display shows the band, preset number and frequency of

the station selected.

Frequency Search Function

You can search for a radio station by its frequency.

Press ENTER in Radio mode to activate Frequency

search mode.

The “” indicator lights up.

Turn the Rotary encoder to select the desired frequency.

Press ENTER to receive the selected frequency.

Note

•Press r in the search mode to cancel. Or, the search mode will be

cancelled if no operation is performed for 10 seconds.

Turning AF (Alternative Frequencies) ON/OFF

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP selection mode.

Turn the Rotary encoder to select the “TUNER” setup

mode, and then press ENTER.

Turn the Rotary encoder to select the “AF”, and then press

ENTER.

Turn the Rotary encoder to select the AF (Alternative

Frequency) ON or OFF mode.

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

• When the AF ON mode is selected, the unit automatically tunes to a

strong signal station in the AF list.

• Use the AF OFF mode when automatic re-tuning is not required.

•Press r to return to the previous mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

The RDS digital data includes the following:

RDS

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

PTY Programme Type

EON Enhanced Other Networks

AUDIO/SETUP

/ENTER



BAND/TA

VIEW





Rotary encoder

Online-store car audio and autogoods Winauto

winauto.ua

1 ... 10 11 12 ... 35

Comments to this Manuals

No comments

Alpine CDE-181RM User Manual Page 11

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-181RM