Alpine 612 User Manual download pdf (Page 34)

3434

LUMBER REQUIRED

(sold separately)

QTY DESCRIPTION

2 5/4" x 6" x 10'

INSTRUCTIONS

1. Cut one 5/4" x 6" x 72-3/4". Cut one 5/4" x 6" x 40" and 42-1/2". Cut

remaining 5/4" x 6" x 28-3/4".

2. Remove the existing base board from the unit. NOTE: Save the hardware as

they will be re-used.

3. Attach the 5/4" x 6" x 72-3/4" board to the base as indicated in Fig. 1

using four (4) 2-1/2" screws/nails and one (1) 2'' Lag Screw at each joint.

4. Attach remaining lumber to the unit as shown in Fig. 1 using three 3" screws

per joint.

5. Drill four 3/8" holes in the top board and four 3/8” holes in the bottom

board as indicated in Fig. 2. NOTE: Drill through the bottom of the 2" x 4"

board to the top. Inser

t the eye bolts of the Cargo Net through the holes of

the top board and secure all of them using a beam clamp, washer and loc

nut (see Fig. 3).

NOTE: Using a hacksaw, remove excess threads of the eyebolt as close to

loc nut as possible.

6. Place bolt covers over the bolts as indicated in Fig. 3. Secure bolt covers

using 2" screws/nails.

7. Place two rope staples as indicated in Fig. 4. Thread the Cargo Net through

the holes of the base and loop through the staples as shown (Fig. 4).

Pull tight and secure by pounding staples tight against the base.

Fig. 4

1’’

5/4" x 6" x 72-3/4"

5/4" x 6" x 28-3/4"

5/4" x 6" x 42-1/2"

5/4" x 6" x 40"

Fig. 1

Fig. 3

Fig. 2

Cargo Net

10”

6-1/2”

10”

Washer and Loc Nut

Bolt Cover

SIDE MOUNTING

OPTION 1

3/8'' Drill Holes

6-1/2”

10”

Meijer.com

1 ... 33 34 35 36

Comments to this Manuals

No comments

Alpine 612 User Manual Page 34

Comments to this Manuals

Related products and manuals for Fridge-freezers Alpine 612