Alpine CDA-9807 Owner's Manual download pdf (Page 8)

6-EN

Basic Operation

CENTER f

MUTE

BAND/TEL.

MODE/Rotary encoder

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1 Press the MODE (Rotary encoder) repeatedly to

choose the desired mode.

Each press changes the modes as follows:

Volume : 0 ~ 35

Balance : L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

Defeat : ON/OFF

NOTES

• If the MODE (Rotary encoder) is not pressed within 5

seconds after selecting the BALANCE, FADER, DEFEAT or

SUBWOOFER mode, the unit automatically returns to the

VOLUME mode.

• *When the subwoofer mode is OFF, its level cannot be

adjusted.

2 Turn the MODE (Rotary encoder) until the desired

sound is obtained in each mode.

By setting Defeat ON, previously adjusted settings of

BASS, TREBLE will return to the factory defaults, but

MX will be turned off.

NOTE

Depending on the connected devices, some functions and display

indications do not work.

Audio Mute Function

Activating this function will instantly lower the volume

level by 20 dB.

1 Press the MUTE button to activate the MUTE mode.

The audio level will decrease by about

20 dB.

Pressing the MUTE button again will bring the audio

back to its previous level.

Displaying Time

1 Press the DISP/TITLE button repeatedly until the

time is displayed.

Each press changes the modes as follows:

Radio mode

CD Player/Changer modes

NOTES

• Selecting any tuner or CD function while in the clock priority

mode will interrupt the time display momentarily. The

function selected will be displayed for about 5 seconds before

the time returns to the display.

• When the power is off but the ignition key is on, press the

DISP/TITLE button to display the time.

•∗ For CDA-9805 model, the display above is shown with a

CD-TEXT compatible changer connected.

Setting Time

1 In the Clock priority mode, press and hold the DISP/

TITLE button for at least 3 seconds while the time is

displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

3 When the hour has been adjusted, press the Rotary

encoder.

4 Turn the Rotary encoder to adjust the minutes while

the time indication is blinking. The time is automatically

set 5 seconds after the minute adjustment. The time

can also be manually set by pressing the Rotary

encoder.

→

Radio frequency

→ →

TITLE mode

Clock priority

mode

Playing time

mode

→

DISC TEXT

mode

→→

Clock priority

mode

TRACK

TEXT mode

←

TITLE mode

←

DISP/TITLE

→ BALANCE → FADER → DEFEAT

SUBWOOFER*← VOLUME ←

1 2 3 4 5 6 7 8 9 ... 41

Comments to this Manuals

No comments

Alpine CDA-9807 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for CD players Alpine CDA-9807