Alpine CDA-9807 Owner's Manual download pdf (Page 16)

14-EN

Radio Operation

SOURCE/

POWER BAND/TEL.

TUNE/A.ME

Preset buttons

(1 through 6)

Changing the Radio Frequencies for

each Country

For customers not living in North America, change the

radio frequencies as follows.

1 Press and hold the F/SETUP button for at least 3

seconds.

2 Select the "AREA" mode by pressing the g or f

button.

3 Choose either AREA 1 or AREA 2 by pressing the

BAND/TEL. button.

AREA 1: Radio frequencies for North America

AREA 2: Other Radio frequencies

NOTE

The stored radio stations will be cleared every time you change

the setting.

Manual Tuning

1 Press the SOURCE/POWER button until a radio

frequency appears in the display.

2 Press the BAND/TEL. button repeatedly until the

desired radio band is displayed.

Each press changes the band:

3 Press the TUNE/A.ME button to select the tuning

mode.

(Only portions underlined on the display may be lit.)

Distance mode:

Both strong and week stations will be automatically tuned

in (Automatic seek tuning).

Local mode:

Only strong stations will be automatically tuned in

(Automatic seek tuning).

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

→ FM1 → FM2 → AM

4 Press the g or f button to move downward or

upward one step respectively until the desired station

frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo FM

station is tuned in.

Automatic Seek Tuning

1 Press the BAND/TEL. button repeatedly until the

desired radio band is displayed.

2 Press the TUNE/A.ME button to select the tuning

mode.

3 Press the g or f button to automatically seek for

a station downward or upward respectively.

The unit will stop at the next station it finds.

Press the same button again to seek the next station.

Manual Storing of Station Presets

1 Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

2 Press and hold any one of the Preset buttons

(1 through 6) that you want to store the station on for

at least 2 seconds. The selected station is stored.

The display shows the band, preset No. and station

frequency memorized.

3 Repeat the procedure to store up to 5 other stations

onto the same band.

To use this procedure for other bands, simply select

the band desired and repeat the procedure.

A total of 18 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2 and AM).

NOTE

If you store a station in a preset memory which already has a

station, the current station will be cleared and replaced with the

new station.

F/SETUP

Rotary encoder

→ DX SEEK → DX SEEK → DX SEEK

(Distance mode) (Local mode) (Manual mode)

1 ... 15 16 17 ... 41

Comments to this Manuals

No comments

Alpine CDA-9807 Owner's Manual Page 16

Comments to this Manuals

Related products and manuals for CD players Alpine CDA-9807