Alpine TDM-7574 User Manual download pdf (Page 17)

15-EN

Slide the TDM-7574 into the dashboard. When the

unit is in place, make sure the locking pins are fully

seated in the down position. This can be done by

pressing firmly in on the unit while pushing the

locking pin down with a small screwdriver. This

ensures that the unit is properly locked and will not

accidentally come out from the dashboard. Install

the Detachable Front Panel.

Removal

1. Remove the Detachable Front Panel.

2. Use a small screwdriver (or similar tool) to

push the locking pins to the "up" position

(see above drawing). As each pin is

unlocked, gently pull out on the unit to make

sure it does not re-lock before unlocking the

second pin.

3. Pull the unit out, keeping it unlocked as you

do so.

Face Plate

Screw (M5 × 8)

(Included)

Lock Pin

Mounting Bracket

TDM-7574

Ground Lead

Installation

TDM-7574

Remove the Detachable Front Panel (refer to page

4). Slide mounting sleeve from main unit. Slide the

mounting sleeve into the dashboard.

Reinforce the head unit with the metal mounting

strap (not supplied). Secure the ground lead of the

unit to a clean metal spot using a screw (∗) already

attached to the vehicle's chassis.

Connect each input lead coming from an amplifier

or equalizer to the corresponding output lead

coming from the left rear of the TDM-7574.

Connect all other leads of the TDM-7574 according

to details described in the CONNECTlONS section.

Mounting sleeve

(Included)

Metal Mounting

Strap

Dashboard

TDM-7574

Bolt Stud

Screw

Ground Lead

Chassis

∗

Hex Nut (M5)

1 ... 16 17 18 19

Comments to this Manuals

No comments

Alpine TDM-7574 User Manual Page 17

Comments to this Manuals

Related products and manuals for Car speakers Alpine TDM-7574