Alpine TDM-7574 User Manual download pdf (Page 16)

14-EN

Installation and Connections

Before installing or connecting the unit, please

read the following and pages 2 and 3 of this

manual thoroughly for proper use.

Warning

USE ONLY VEHICLES WITH A 12 VOLT NEGATIVE (–)

GROUND.

Check with your dealer if you are not sure. Failure to do

so may result in fire or electric shock.

BEFORE WIRING, DISCONNECT THE CABLE FROM

THE NEGATIVE (–) BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due

to electrical shorts.

DO NOT CUT AWAY THE WIRE SHEATH AND USE

POWER FOR OTHER EQUIPMENT.

Doing so may exceed the current carrying capacity of the

wire and result in fire or electric shock.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION OR CREATE

HAZARDS FOR VEHICLE OCCUPANTS.

Doing so may obstruct forward vision or hamper

movement.

DO NOT CONTACT, DAMAGE OR OBSTRUCT PIPES,

FLUID LINES OR WIRING WHEN DRILLING HOLES.

Failure to take such precautions may result in fire or cause

an accident or injuries.

DO NOT USE NUTS OR BOLTS IN THE BRAKE

SYSTEM WHEN MAKING INSTALLATION OR

GROUND CONNECTIONS.

Never use safety-related parts such as bolts or nuts in the

steering or brake systems or tanks to make wiring

installations or ground connections. Using such parts

could disable control of the vehicle and cause brake

failure, other accident or injury.

MAKE THE CORRECT CONNECTIONS.

Failure to do so may cause fire or accident to occur.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED.

Route the cables and wiring so as not to be crimped by

moving parts or make contact with sharp or pointed spots

which might damage the wiring. Failure to do so may

cause failure of unit or vehicle.

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit requires special

technical skill and experience. To ensure safety, always

contact the dealer where you purchased this unit to have

the work done.

Caution

USE SPECIFIED ACCESSORY PARTS AND INSTALL

THEM SECURELY.

Use of other than designated parts may damage this unit

internally or may not securely install the unit in place as

parts that come loose may create hazards.

DO NOT INSTALL IN LOCATIONS WITH HIGH

MOISTURE OR DUST.

A high incidence of moisture or dust that penetrates into

this unit may cause smoke or fire.

Precautions

• Be sure to disconnect the cable from the (–) battery post

before installing your TDM-7574. This will reduce any

chance of damage to the unit in case of a short-circuit.

• Be sure to connect the color coded leads according to

the diagram. Incorrect connections may cause the unit

to malfunction or damage to the vehicle’s electrical

system.

• When making connections to the vehicle’s electrical

system, be aware of the factory installed components

(e.g. on-board computer). Do not tap into these leads to

provide power for this unit. When connecting the

TDM-7574 to the fuse box, make sure the fuse for the

intended circuit of the TDM-7574 has the appropriate

amperage. Failure to do so may result in damage to the

unit and/or the vehicle. When in doubt, consult your

ALPINE dealer.

• The TDM-7574 uses female RCA-type jacks for

connection to other units (e.g. amplifier) having RCA

connectors. You may need an adaptor to connect other

units. If so, please contact your authorized ALPINE

dealer for assistance.

• Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel

speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the

space provided below and keep it as a permanent

record. The serial number plate is located on the

bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

1 ... 15 16 17 18 19

Comments to this Manuals

No comments

Alpine TDM-7574 User Manual Page 16

Comments to this Manuals

Related products and manuals for Car speakers Alpine TDM-7574