Alpine INA-N033R Owner's Manual download pdf (Page 21)

19-EN

Turning Mute Mode On/Off

If a device having the interrupt feature is connected,

audio will be automatically muted whenever the interrupt

signal is received from the device. This function can be

turned ON or OFF from the head unit by following

procedure below.

1 Press and hold the SETUP button for at least 2

seconds. The display changes to the SETUP screen.

2 Move the Flipper switch up or down to select MUTE.

Press the OK button or MODE knob to set.

3 Move the Flipper switch up or down to select ON or

OFF. Press the OK button or MODE knob to set. The

display returns to the SETUP screen.

NOTE

The initial setting at the factory is "MUTE ON."

4 Press the SETUP button again to return to normal

operation.

NOTE

When Mute is set to OFF, if an external interruption (e.g.,

vehicle phone) happens, the display shows “INT.”.

When Mute is set to ON, the display shows “MUTE”.

Adjusting Source Signal Level

If the difference in volume level between the CD player

and FM radio is too great, adjust the FM signal level as

follows.

1 Press and hold the SETUP button for at least 2

seconds. The display changes to the SETUP screen.

2 Move the Flipper switch up or down to select FM

LEVEL.

Press the OK button or MODE knob to set.

3 Move the Flipper switch up or down to select HIGH or

LOW. Press the OK button or MODE knob to set. The

display returns to the SETUP screen.

4 Press the SETUP button to activate the normal mode.

Demonstration

This unit has the Demonstration feature which simulates

the display functions on the display panel.

1 Press and hold the SETUP button for at least 2

seconds. The display changes to the SETUP screen.

2 Move the Flipper switch up or down to select DEMO.

Press the OK button or MODE knob to set.

3 Move the Flipper switch up or down to select ON or

OFF. Press the OK button or MODE knob to set. The

display returns to the SETUP screen.

If no buttons are pressed 30 seconds after the DEMO

mode is turned ON. The DEMO mode then begins.

NOTE

The initial setting at the factory is "DEMO OFF".

4 Press the SETUP button again to return to normal

operation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Comments to this Manuals

No comments

Alpine INA-N033R Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for Navigators Alpine INA-N033R