Alpine DHA-S680 Owner's Manual download pdf (Page 51)

FR

ES

DE

SE

IT

49-EN

9

Examples of System Upgrades

Precautions when Making System Upgrades

• After connections are completed, it will be

necessary to change the system settings of the

DHA-S680. Before installing the product, please

see page 48 and change the settings.

• When connecting the DHA-S680 to a head unit

or AV head unit, do not connect the switched

power lead (ignition).

• When connecting the optical digital output to an

ALPINE digital audio processor (such as the

PXA-H510 and PXA-H900), be sure to make

connection to the CHANGER connectors of the

digital audio processor optical digital input

connectors.

This arrangement allows you to enjoy Dolby

Digital 5.1 Channel Surround and other effects

even when connection is made to the

CHANGER connectors.

• When using the Alpine Versatile Link Terminal

(KCA-410C) and connecting the DHA-S680,

connect the DHA-S680 Ai-NET cable to the

CHANGER1 connector of the KCA-410C.

Also note that when using the KCA-410C and

making connections, system setting changes of

the DHA-S680 will be required before connecting

the KCA-410C. See page 48 and make the

settings.

• When combining the DHA-S680 and the CD

changer (CHA-S624), the optical digital output of

the CHA-S624 cannot be used.

• When connecting the DHA-S680 to an Alpine TV

monitor and AV head unit together, be sure to

connect the mutual remote control input cable

(white/brown). Failing to do so will result in a loss

of remote control operation.

When making connections to another brand of

TV monitor, please use the supplied remote

control sensor unit.

Select “ON” or “OFF” using the Joystick, then

press the ENT button.

• Set to “ON” in the following cases:

When the DHA-S680 is connected to an Ai-

NET compatible head unit or an Ai-NET

compatible AV head unit.

In this case, if set to “OFF” the DHA-S680

cannot be controlled from the head unit, and

the sound of external products (CD changer,

etc.) cannot be heard.

“ON” is set upon shipment from the factory.

• Set to “OFF” in the following cases:

When using a head unit that is not Ai-NET

compatible or another brand of head unit.

10

Press and hold the SET button for at least 2

seconds.

The settings are stored in the memory and the

setting mode is canceled.

11

Press and hold the V.OUT button on the remote

control unit for at least 2 seconds to turn the

power off.

Disconnect the remote control sensor unit.

NOTE

When not connecting an Ai-NET compatible head unit,

do not disconnect the Remote Control Sensor Unit.

12

Turn the vehicle’s ignition key off, then turn it

back on.

13

Switch the head unit’s source to check that the

DHA-S680’s power turns on. Insert a disc and

check that the picture and sound are properly

output.

If the power does not turn on, start the setting

procedure over from the beginning.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 65 66

Comments to this Manuals

No comments