Alpine CDA-7998 Owner's Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
7-EN
Subwoofer
Balance Fader Defeat Volume
Equalizer Presets
3 typical equalizer settings are preset at the
factory for a variety of musical source material.
1 Press the EQ button and select the EQ mode.
2 Press either the g DN button or the f UP
button.
With each press of the button, the equalizer mode
will display the selected equalizer characteristic.
FLAT : Flat frequency
POPS : Emphasize midrange
ROCK : Emphasize lows and highs
NEWS : Boost midrange and suppress highs and lows
Selecting directly
Select the desired button (1 through 4).
[1]: FLAT(OFF) [3]: ROCK
[2]: POPS [4]: NEWS
3 When the setting is complete, press the EQ button to
select OFF, and return to normal mode.
NOTES
This function is inoperable when DEFEAT is ON (refer to
this page ).
EQ mode is automatically cancelled if no buttons are
pressed within 15 seconds.
When the ALPINE Digital Audio Processor is connected to
the Digital Output Connector, the Equalizer, Crossover, Bass
Focus, Time Correction and MX (Media Xpander) functions
cannot be used in the built-in CD mode.
The functions on the connected Digital Audio Processor side
take preference.
FLAT(OFF) POPS ROCK NEWS
Adjusting Volume/Balance
(
Between
Left and Right
)
/Fader
(
Between Front
and Rear
)
/Defeat
1 Press the MODE button repeatedly to choose the
desired mode.
Each press changes the modes as follows:
Volume :0~35
Balance :L15~R15
Fader :R15~F15
Subwoofer :0~+15
Press the g DN or f UP button after selecting
the Subwoofer mode, and the subwoofer output phase
is toggled "PHASE 0° " or "PHASE 180°."
NOTES
If the MODE button is not pressed in 5 seconds after
selecting the BALANCE, FADER, DEFEAT and
SUBWOOFER modes, the unit automatically sets in the
VOLUME mode.
When setting the 2WAY/3WAY switch (page 10) to 3WAY,
you cannot adjust the FADER mode.
•∗ When the subwoofer is set to OFF, the level of the subwoofer
cannot be adjusted.
2 Turn the Rotary encoder until the desired sound is
obtained in each mode.
NOTE
Depending on the connected devices, some functions and
display indications do not work.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Comments to this Manuals

No comments