Alpine IVA-D310R Owner's Manual download pdf (Page 40)

39-EN

01GB06IVA310R.fm

ALPINE IVA-D310R 68-02278Z24-A (EN)

The frequency bands of the graphic equalizer are fixed. This makes it

very difficult to correct for undesired peaks and dips at specific

frequencies. The parametric equalizer’s centre frequency can be tuned

to these specific frequencies. Then, the bandwidth (Q) and level are

fine-tuned, independently, to make the necessary corrections. The

parametric equalizer function is an advanced tool for serious

audiophiles.

Setting item: P-EQ

1 Touch [] of P-EQ.

The screen changes to the P-EQ screen to be adjusted.

2 Adjust the desired band.

P-EQ adjustment screen example

Displays the band currently selected

Displays the center frequency of the band currently

selected

Displays the band level currently selected

Displays the bandwidth (Q) of the band currently

selected

Variable range of center frequency of the band currently

selected

Active point: displays the center frequency and level

position of the band currently selected

Active bar: displayed the variable range of the band

level currently selected with an orange bar

Adjusting the Frequency

Touch [] or [], and adjust the selected band

frequency.

Center Frequency

Adjusting the Level

Touch [] or [], and adjust the selected band level.

Level: -12 ~ +12

Selecting the Band

The band (BAND1 through BAND4) changes each time

the [BAND] is touched.

The variable range of the active bar and the center

frequency moves according to the band.

• Touching outside the range for a selected band will move the active

bar to a band where the touched position can be adjusted.

Setting the Bandwidth

The bandwidth changes each time [Q] is touched.

Adjusting the Level/Frequency Directly

Move to a desired position by touching the active point and change the

setting contents. Or, move the active point to the desired position by

touching where you wish to move it.

• If you set the parametric EQ, BASS MAX EQ setting content is set to

“CUSTOM.”

3 Touch [RETURN] to return to the previous screen.

Storing Adjusted Contents

The following operation is performed after Step 3 above.

4 Touch [MEMORY] on the BASS ENGINE screen.

5 Within 5 seconds, touch any one of preset buttons

[P.SET 1] through [P.SET 6].

The adjusted contents are stored on the P.SET number

you touch.

• The stored contents on the P.SET number remain undeleted despite a

following reset operation or disconnection of the battery power cord.

• Adjusted/set contents of each setting item in Bass Engine can be

stored in the preset buttons (1 through 6).

Recalling the Adjusted and Stored Contents

The following operation is performed after Step 3 above.

4 Touch any one of [P.SET 1] to [P.SET 6] on the BASS

ENGINE screen.

The adjusted and stored contents are recalled.

• This function is inoperable when Defeat is set to ON.

Adjusting and Storing/Recalling the

Parametric EQ

HIGH : 10kHz, 12.5kHz, 15kHz

MID-HIGH : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz

MID-LOW : 100Hz, 150Hz, 200Hz

LOW : 40Hz, 60Hz, 90Hz

BAND1 : LOW

BAND2 : MID-LOW

BAND3 : MID-HIGH

BAND4 : HIGH

HIGH : 1.0 (Bandwidth setting for HIGH is not available.)

MID-HIGH : 1.0, 2.0, 3.0

MID-LOW : 1.0, 1.5, 2.0

LOW : 1.0, 2.0, 3.0

01GB00IVAD310R.book Page 39 Thursday, January 13, 2005 10:40 AM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

Comments to this Manuals

No comments

Alpine IVA-D310R Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for Car video systems Alpine IVA-D310R