Alpine ICS-X7HD Owner's Manual download pdf (Page 8)

8-EN

01GB04ICS-X7HD.fm

ALPINE ICS-X7HD 68-21057Z34-A (EN/FR/ES)

NOTICE

Product Cleaning

Use a soft dry cloth for periodic cleaning of the product. For more

severe stains, please dampen the cloth with water only. Anything

else has the chance of dissolving the paint or damaging the plastic.

Temperature

Be sure the temperature inside the vehicle is between +45°C

(+113°F) and 0°C (+32°F) before turning your unit on.

Maintenance

If you have problems, do not attempt to repair the unit yourself.

Return it to your Alpine dealer or the nearest Alpine Service

Station for servicing.

Installation Location

Make sure the ICS-X7HD will not be installed in a location

subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

Operation of some of the functions of this unit is very complex.

Because of this, it was deemed necessary to place these functions

into a special screen. This will restrict operation of these functions

to times when the vehicle is parked. This ensures the focus of the

driver’s attention will be on the road and not on the ICS-X7HD.

This has been done for the safety of the driver and passengers.

Setup operations cannot be made if the car is moving. The car must

be parked and the parking brake must be engaged for the procedure

described in the Owner’s Manual to be valid. The warning “Unable

to operate while driving.” will be displayed if any attempts are

made to perform these operations while driving.

• The ICS-X7HD draws minimal current even when its power switch is

turned off. If the switched power (ignition) lead of the ICS-X7HD is

connected directly to the positive (+) post of the vehicle’s battery, the

battery may be discharged.

An SPST (Single-Pole, Single-Throw) switch (sold separately) can be

added to simplify this procedure. Then, you can simply place it in the

OFF position when you leave the vehicle. Turn the SPST switch back

ON before using the ICS-X7HD. For connecting the SPST switch,

refer to the “Connection Diagram of SPST Switch (sold separately)”

(page 78). If the power (ignition) lead is unswitched, it must be

disconnected from the battery post should the vehicle be left unused

for an extended period of time.

Protecting the USB connector

• Only an iPod/iPhone, USB memory or Mobile Phone can be

connected to the USB connector on this unit. Correct

performance using other USB products cannot be guaranteed.

• If the USB connector is used, be sure to use only the supplied

connector cable with the unit. A USB hub is not supported.

• Depending on the connected USB memory device, the unit may

not function or some functions may not be performed.

• The audio file format that can be played back on the unit is MP3/

WMA/AAC.

• The video file format that can be played back on the unit is

DivX

• Artist/song name, etc., can be displayed. Certain, special

characters may not be correctly displayed.

On Handling USB Memory

• This unit can control a memory storage device that supports the

USB Mass Storage Class (MSC) protocol. Playable audio file

formats are MP3, WMA and AAC.

• USB memory function is not guaranteed. Use USB memory

according to the terms of agreement. Read the USB memory

Owner’s Manual thoroughly.

• Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high

temperatures.

Anywhere the possibility of high humidity or corrosive

substances are present.

• Fix the USB memory in a location where driver operation will

not be hindered.

• USB memory may not function correctly at high or low

temperature.

• Use only certified USB memory. Note that even certified USB

memory, may not function correctly depending on its type or

state.

• Depending on the settings of the USB memory type, memory

state or encoding software, the unit may not play back or display

properly.

• Files protected by DRM (Digital Rights Management), cannot

be played back on this unit. These include AAC formatted files

purchased from the iTunes Store and WMA or other files with

some form of copyright protection.

• USB memory may take time to start playback. If there is a

particular file other than audio in the USB memory, it may take

considerable time before the file is played back or searched.

• The unit can play back “mp3,” “wma” or “m4a” file extensions.

• Do not add the above extensions to a file other than audio data.

This non-audio data will not be recognized. The resulting

playback may contain noise that can damage speakers and/or

amplifiers.

• It is recommended to back up important data on a personal

computer.

• Do not remove the USB device while playback is in progress.

Change application to something other than USB, then remove

the USB device to prevent possible damage to its memory.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc.,

is lost while using this product.

01GB00ICS-X7HD.book Page 8 Friday, October 12, 2012 5:20 AM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 85 86

Comments to this Manuals

No comments

Alpine ICS-X7HD Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Car video systems Alpine ICS-X7HD