Alpine HCE-C300R Owner's Manual Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
89-EN
Storing the Preset Dialing Number
Numbers that you dial frequently can be stored into a preset list for
quick recall. Five numbers can be assigned as the preset dialing
numbers. After setting, you can dial these numbers directly. About how
to make a preset dialing, refer to “Dialing the preset number” (page 89).
1
Touch [] of the desired name on the Phone Book
screen.
The stored numbers of the selected name is listed.
Display example for the number list screen
2
Touch the [Preset] of the number you want to
assign as a preset dialing number.
A message will display to show you the preset NO. (1~ 5) of
the assigned number.
If all the 5 positions have been used, you cannot assign the 6th
number. To assign another number, you need to delete one of the
preset number from position 1 to 5 first. About how to delete the
preset number, refer to
“Deleting the stored shortcut memory” on
page 85.
Dialing the preset number
Display example for Telephone Menu screen
Touch any one of the preset buttons [P.SET 1] through
[P.SET 5] that has a number stored to it on the
Telephone Menu screen.
The stored preset number is dialed directly.
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of INA-W910 (AUX1 mode) or to the iPod (V)/AUX Input
Connector by using an optional AV/RCA interface cable (4-pole mini
AV plug to 3-RCA) (AUX2 mode), follow the procedures described
below.
Auxiliary Device
(Optional)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur.
Install the INA-W910 correctly so that the driver
cannot watch Video unless the vehicle is stopped and
the emergency brake is applied.
If the INA-W910 is not installed correctly, the driver
will be able to watch the Video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
To activate your auxiliary devices:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the AUX mode operation has been
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To activate your auxiliary devices”.
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices”.
If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 197 198

Comments to this Manuals

No comments